Samsung Dishwasher Error OE
⚡ Quick Answer: The Samsung Dishwasher OE error indicates a drainage issue, often resulting in water pooling at the bottom of the appliance. This error occurs when th... ✅ DIY Fixable
What Does Error OE Mean?
The Samsung Dishwasher OE error indicates a drainage issue, often resulting in water pooling at the bottom of the appliance. This error occurs when the dishwasher is unable to drain properly, either due to a clogged drainage system or when the internal sensor detects excessive water levels. Users may notice that the dishwasher stops mid-cycle, and water remains in the tub after a wash. To resolve this, it's important to check and clear the drainage components, including the filter and drain hose.
Common Symptoms:
- Dishwasher stops mid-cycle with OE displayed
- Water remains in the tub after cycle
- Dishwasher fails to drain water properly
Possible Causes
- Clogged or blocked drainage system (filter, drain hose, or drain pump obstruction) (medium)
- Water overflow detected by internal sensor due to excessive water level (medium)
How to Fix Error OE
DIY Fix Check and clear drainage components
- Turn off and unplug the dishwasher
- Remove and clean the dishwasher filter
- Inspect the drain hose for kinks or blockages
- Ensure the drain pump area is free of debris
DIY Fix Reset the dishwasher
- Turn off the dishwasher at the power source for at least 5 minutes
- Reconnect power and restart a cycle to see if OE clears
Technician Only Inspect and service drain pump or overflow sensor
- Disconnect dishwasher from power
- Remove access panels to reach drain pump
- Test and replace faulty drain pump or overflow sensor if necessary
- Verify proper drain hose routing and clearance
Parts needed: Drain pump, Overflow/water level sensor, Drain hose
- Persistent OE error after cleaning and reset
- Water leak detected outside dishwasher
- Drain pump or electronic sensor suspected faulty
Next step
Choose the next step for OE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does OE error mean on Samsung Dishwasher?
The OE error indicates a drainage issue, often shown when the dishwasher stops mid-cycle and water remains in the tub.
Can I fix Samsung Dishwasher OE error myself?
Yes, you can resolve the OE error by checking and clearing the drainage components and resetting the dishwasher.
How much does it cost to fix OE error?
The estimated cost to fix the OE error ranges from $100 to $300+, depending on parts and labor.
When should I call a technician for OE?
Call a technician if the OE error persists after cleaning and resetting, if there's a water leak outside the dishwasher, or if you suspect a faulty drain pump or sensor.
Sources & References
- How to Fix Samsung Dishwasher OE Error Code (community)
- What Is The Samsung Dishwasher OE Code? Easy Fixes (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!