Samsung Dishwasher Error CE
⚡ Quick Answer: The Samsung Dishwasher CE error code indicates a communication error between the electronic control components, typically involving the control panel ... ✅ DIY Fixable
What Does Error CE Mean?
The Samsung Dishwasher CE error code indicates a communication error between the electronic control components, typically involving the control panel or touchpad and the main control board. This issue may prevent the dishwasher from starting or cause it to stop mid-cycle, often resulting in an unresponsive or flickering control panel. To address this, check for loose or disconnected wiring, and consider the possibility of a faulty control panel or main control board.
Common Symptoms:
- Dishwasher fails to start or stops mid‑cycle when CE appears
- Control panel is unresponsive or flickering display
- Dishwasher appears otherwise idle after CE displays
Possible Causes
- Loose or disconnected wiring between control panel/touchpad and main control board (medium)
- Faulty control panel (touchpad/display PCB) (medium)
- Faulty main control board (main PCB) (medium)
How to Fix Error CE
DIY Fix Basic Checks and Power Reset
- Turn off the dishwasher and disconnect power at the breaker or plug.
- Wait 1–2 minutes and reconnect power to perform a full reset.
- Observe if the CE error reappears upon restart.
Technician Only Inspect and Repair Communication Path
- Remove the dishwasher access panel and inspect wiring harnesses between the control panel/touchpad and main control board.
- Check connectors for corrosion, damage, or looseness; reseat or replace as needed.
- Test the control panel and main PCB for faults with a multimeter/diagnostic tool.
- Replace defective control panel PCB or main PCB if confirmed faulty.
Parts needed: Control panel/touchpad assembly, Main control board (main PCB), Wiring harness/connectors
- If CE persists after basic power reset and wiring inspection, as deeper PCB diagnostics are needed.
- If you are uncomfortable working with internal wiring or PCBs, contact professional appliance service.
Next step
Choose the next step for CE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 1500W |
|---|---|
| component | Leak Sensor |
| resistance | 1-5 ohms |
| part_number | DC97-16950A |
| voltage_rating | 120V AC |
Common Questions
What does CE error mean on Samsung Dishwasher?
The CE error indicates a communication issue between the control panel and main control board, causing the dishwasher to be unresponsive.
Can I fix Samsung Dishwasher CE error myself?
Yes, you can perform basic checks and a power reset by turning off the dishwasher and disconnecting power for a few minutes.
How much does it cost to fix CE error?
Repair costs typically range from $150 to $500+, depending on parts and service rates.
When should I call a technician for CE?
Call a technician if the CE error persists after a reset or if you're uncomfortable working with internal wiring or PCBs.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!