Samsung Dishwasher Error AP

⚡ Quick Answer: The 'AP' error code on Samsung dishwashers indicates that the unit is in Access Point (Wi-Fi setup) mode rather than a malfunction. In this mode, the ... ✅ DIY Fixable

What Does Error AP Mean?

The 'AP' error code on Samsung dishwashers indicates that the unit is in Access Point (Wi-Fi setup) mode rather than a malfunction. In this mode, the dishwasher's Wi-Fi hotspot is active for configuration, and it should operate normally aside from displaying 'AP.' This typically occurs when the Wi-Fi connection process is initiated or if the service mode is unintentionally activated.

Common Symptoms:

  • Display shows "AP" instead of a numeric or traditional error
  • Dishwasher operates normally aside from the AP indication
  • Occurs when setup or network configuration was attempted

Possible Causes

  • Dishwasher in Wi‑Fi Access Point / Service / Setup mode (medium)
  • Unintended activation of service/access mode (e.g., button combination or network attempt) (low)

How to Fix Error AP

DIY Fix Exit AP Mode and Reset Dishwasher

  1. If the dishwasher is showing AP due to Wi‑Fi setup, complete or cancel the Wi‑Fi connection process
  2. Power cycle the dishwasher by turning it off, waiting ~1 minute, and turning it back on
  3. Consult your model’s user manual for specific Wi‑Fi connection instructions (smart connectivity section)

Technician Only Technician Help for Persistent AP Display

  1. Verify the control panel and firmware state for the specific dishwasher model
  2. Use service mode or diagnostics tools to properly exit AP/service configuration
  3. Check for control board firmware issues related to network/display states

Parts needed: Control board (only if firmware or configuration errors are found)

🛑 When to Call a Pro:
  • If AP remains after reset and interferes with normal washing cycles
  • If the dishwasher displays additional error codes along with AP that indicate other faults

Next step

Choose the next step for AP

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number DC97-16930B
voltage_rating 120V AC

Common Questions

What does AP error mean on samsung dishwasher?

'AP' indicates the dishwasher is in Access Point mode for Wi-Fi setup, not a fault.

Can I fix samsung dishwasher AP error myself?

Yes, you can exit AP mode by completing or canceling the Wi-Fi setup and power cycling the dishwasher.

How much does it cost to fix AP error?

Repair costs vary, but a service call fee typically applies if further assistance is needed.

When should I call a technician for AP?

Call a technician if 'AP' persists after a reset and affects normal operation or if additional error codes appear.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!