Samsung Dishwasher Error AE

⚡ Quick Answer: AE means Samsung Dishwasher error AE indicates a water leakage detection issue, often accompanied by a continuous beeping sound a... This is typically a DIY fix.

What Does Error AE Mean?

Samsung Dishwasher error AE indicates a water leakage detection issue, often accompanied by a continuous beeping sound and the display showing the error code.

Common Causes

  • Leak Sensor (50% likelihood)
  • Door Seal (30% likelihood)
  • Hose Connections (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Base for Water

    Remove the bottom dish rack and check for any water accumulation in the base of the dishwasher. If present, dry it thoroughly with a towel.

    This may help clear the error temporarily.

  2. Step 2: Check the Door Seal

    Examine the door seal for any cracks or debris. Clean it if necessary, or replace it if damaged.

    A good seal is crucial to prevent leaks.

  3. Step 3: Examine Hose Connections

    Inspect all hose connections for tightness and signs of wear. Tighten any loose connections and replace hoses if they appear damaged.

    Ensure that hoses are not kinked.

  4. Step 4: Test the Leak Sensor

    If the error persists, locate the leak sensor and test it for proper function. This may require a multimeter.

    If faulty, the sensor will need replacement.

  5. Step 5: Reset the Dishwasher

    After addressing any leaks, reset the dishwasher by holding the Start+Cancel buttons simultaneously for 3 seconds.

    This can clear the error code if the issue is resolved.

How to Reset

To reset the Samsung dishwasher after fixing the leak, hold the Start+Cancel buttons for 3 seconds until the display resets.

Technical Specifications

wattage 1440W
component Leak Sensor
resistance 10-20 ohms
part_number DC97-16940A
voltage_rating 120V AC

Frequently Asked Questions

Can I continue using my dishwasher with error AE?

It's not recommended as it indicates a potential water leak, which could cause further damage.

How long does it take to fix the AE error?

Fixing the AE error typically takes about 30-45 minutes, depending on the issue.

What causes the Samsung Dishwasher error AE?

The error is usually caused by a leak detected by the sensor, often due to a faulty door seal or loose hose connections.

Should I call a professional if I see error AE?

If you're unable to locate the leak or if the sensor seems faulty, it's advisable to call a professional for assistance.

When should I consider replacing my dishwasher due to error AE?

If the error persists after multiple repairs or if the cost of repairs exceeds the value of the dishwasher, consider replacement.

User Comments (0)

Share your experience or solution below.

Be the first to comment!