Miele Dryer Error F30
⚡ Quick Answer: The Miele dryer F30 error indicates a malfunction related to the door switch or door contact signal. This issue prevents the dryer from starting or co... ✅ DIY Fixable
What Does Error F30 Mean?
The Miele dryer F30 error indicates a malfunction related to the door switch or door contact signal. This issue prevents the dryer from starting or continuing its cycle, as the system detects a discrepancy in the door's status. To resolve this, ensure the door is properly closed and clear of obstructions. If the error persists, further technical diagnosis may be necessary.
Common Symptoms:
- F30 displayed on dryer screen before or during operation
- Dryer may refuse to start or continue cycle until error is resolved
Possible Causes
- Mismatch between door status signal and door contact signal (door/door switch issue) (high)
How to Fix Error F30
DIY Fix Basic user checks for door closure and reset
- Ensure the dryer door is fully closed and not obstructed by laundry or foreign objects.
- Open and firmly close the door to ensure proper contact.
- Turn off the dryer, wait 1–2 minutes, and restart to see if the error clears.
Technician Only Technician diagnosis of door switch/communication fault
- Test and verify the door switch and latch sensor signals for correct operation.
- Inspect wiring harness and connectors between door switches and control board for continuity and damage.
- Replace faulty door switch/contact assembly or repair wiring as required.
Parts needed: Door switch / door contact sensor, Wiring harness between door and control board
- If F30 persists after basic user-level checks and power reset.
- If dryer refuses to operate normally due to the F30 error.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Miele 11025700 |
| voltage_rating | 240V AC |
Common Questions
What does F30 error mean on Miele dryer?
F30 indicates a door switch or contact signal malfunction, preventing operation.
Can I fix Miele dryer F30 error myself?
Yes, check door closure and perform a reset by turning off the dryer for 1-2 minutes.
How much does it cost to fix F30 error?
Repair costs range from $100 to $300+, depending on parts and labor.
When should I call a technician for F30?
Call a technician if the F30 error persists after user-level checks.
Sources & References
- Miele Support – Fault F30 Tumble Dryer (official)
- Miele Support – F30 Dryer Error (Hong Kong) (official)
- Miele Support – Fehler F30 Trockner (Germany) (official)
Data last verified: 2026-02-11
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!