Miele Dryer Error F01
⚡ Quick Answer: The Miele dryer error F01 indicates a potential malfunction in the control board, which may result in the dryer failing to start or stopping mid-cycle... ✅ DIY Fixable
What Does Error F01 Mean?
The Miele dryer error F01 indicates a potential malfunction in the control board, which may result in the dryer failing to start or stopping mid-cycle. Users often experience unresponsive buttons or erratic display behavior when this error occurs. To troubleshoot, try performing a power reset by unplugging the dryer for 5–10 minutes before plugging it back in and attempting a test cycle.
Common Symptoms:
- Dryer stops working or will not start when F01 is displayed (reported in general dryer contexts)
- May appear during cycle start or mid‑cycle stoppage (community repair reports)
Possible Causes
- Control Board
How to Fix Error F01
DIY Fix Power reset / basic checks
- Turn off the dryer and unplug it from the mains.
- Wait several minutes then re‑plug and try a test cycle.
Technician Only Professional diagnosis of control electronics
- Access the appliance’s main control board/electronic control module.
- Visually inspect the control unit for damage (burn marks, corrosion).
- Use proper diagnostic tools to verify faults in control board circuitry.
- Replace defective electronic control module if necessary.
Parts needed: Main electronic control board/module
- If error persists after basic reset attempts.
- If opening the dryer and diagnosing electronics is beyond your expertise.
- If the dryer shows signs of electrical damage or unsafe operation.
Next step
Choose the next step for F01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F01 error mean on Miele dryer?
F01 indicates a control board malfunction, causing the dryer to stop working or fail to start.
Can I fix Miele dryer F01 error myself?
Yes, you can try a power reset by unplugging the dryer for 5–10 minutes and then plugging it back in.
How much does it cost to fix F01 error?
Estimated repair costs range from ¥20,000 to ¥70,000, depending on the model and region.
When should I call a technician for F01?
Call a technician if the error persists after a reset, or if you're not comfortable diagnosing electrical components.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!