Miele Dryer Error F06

⚡ Quick Answer: The Miele dryer error F06 indicates a potential issue with the heating element, causing the appliance to stop shortly after starting or preventing it ... ✅ DIY Fixable

What Does Error F06 Mean?

The Miele dryer error F06 indicates a potential issue with the heating element, causing the appliance to stop shortly after starting or preventing it from entering the drying cycle. It is essential to ensure the dryer door is fully closed and check for any obstructions. If the problem persists after a power cycle and thorough cleaning of the lint filter and vents, further inspection may be required.

Common Symptoms:

  • Dryer stops shortly after start with F06 displayed (community report)
  • Dryer may not proceed to drying cycle when F06 appears (community report)

Possible Causes

  • Heating Element
  • Thermal Fuse
  • Wiring Issues

How to Fix Error F06

DIY Fix Basic checks and reset

  1. Ensure the dryer door is fully closed and nothing (lint or clothing) is obstructing the door latch (community pattern)
  2. Power‑cycle the dryer: turn off and unplug for several minutes, then plug back in and restart (generic reset step often suggested for undefined codes)
  3. Check lint filter and vents for blockages, as restricted airflow can sometimes cause stoppages (general maintenance)

Technician Only Inspect door lock/switch assembly

  1. Verify that the door lock microswitch and latch are functioning properly (continuity when closed as per model spec)
  2. Check wiring between door switch and control board for continuity and secure connections
  3. If door lock/switch is faulty, replace with correct OEM part

Parts needed: door lock assembly, door microswitch

Technician Only Professional diagnostic

  1. If error persists after basic checks, run full diagnostic using Miele technician tools
  2. Check control board and sensor inputs related to door and start conditions
  3. Refer to official Miele technical documentation specific to your model

Parts needed: diagnostic tools, various sensed components

🛑 When to Call a Pro:
  • If door lock/switch inspection is inconclusive
  • If error persists after clean/door check and reset

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-20 ohms
part_number Miele 501001
voltage_rating 240V AC

Common Questions

What does F06 error mean on Miele dryer?

The F06 error signifies a malfunction related to the heating element, causing the dryer to stop or not proceed to the drying cycle.

Can I fix Miele dryer F06 error myself?

Yes, you can check if the door is fully closed, clear any lint blockages, and perform a power cycle to reset the appliance.

How much does it cost to fix F06 error?

Repair costs for the F06 error typically range from ¥6,000 to ¥15,000, depending on parts and labor.

When should I call a technician for F06?

Call a technician if the door lock inspection is inconclusive or if the error persists after performing basic checks and resets.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!