Miele Dryer Error F02

⚡ Quick Answer: The Miele dryer F02 error indicates a malfunction in the temperature sensor circuit, which can result in the dryer failing to produce heat. This issue... ⚠️ Difficulty Varies

What Does Error F02 Mean?

The Miele dryer F02 error indicates a malfunction in the temperature sensor circuit, which can result in the dryer failing to produce heat. This issue may cause the dryer to stop heating or abort the cycle, often occurring during the heating phase. A faulty NTC temperature sensor or an open circuit in the heater can trigger this error, affecting the dryer’s ability to operate efficiently.

Common Symptoms:

  • Dryer stops heating or aborts cycle when F02 appears
  • Dryer may only run in air‑dry or non‑heating modes
  • Error appears during heating phase

Possible Causes

  • Open circuit in heater or refrigerant temperature sensor (high)
  • NTC temperature sensor fault on heater bank (open circuit or failure) (medium)

How to Fix Error F02

DIY Fix Basic checks before technician call

  1. Turn off the dryer and unplug from power.
  2. Check for visible signs of overheating or obstructions around external vents.
  3. Ensure lint filters and airways are clean to prevent false sensor triggers.

Technician Only Diagnose and replace temperature sensor

  1. Disconnect power and access the heater assembly.
  2. Measure continuity of the heater and refrigerant temperature sensors (NTC) to confirm open circuit.
  3. Replace failed temperature sensor(s) as required.
  4. Verify wiring harness and connectors to control board for damage or corrosion.

Parts needed: Temperature sensor (NTC) for heater bank/refrigerant circuit, Possible wiring harnesses or connectors

🛑 When to Call a Pro:
  • Error persists after basic cleaning and power cycle
  • No improvement after checking external vents and filters
  • User is not comfortable or trained for electrical diagnostics

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-30 ohms
part_number Miele 7072170
voltage_rating 240V AC

Common Questions

What does F02 error mean on Miele dryer?

F02 error means there's a fault in the temperature sensor circuit, affecting the heating.

Can I fix Miele dryer F02 error myself?

Yes, you can perform basic checks like cleaning filters and vents, but further diagnostics may require a technician.

How much does it cost to fix F02 error?

Estimated repair costs range from $80 to $250, depending on parts and labor.

When should I call a technician for F02?

Call a technician if the error persists after cleaning or if you're uncomfortable with electrical diagnostics.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!