Miele Dryer Error F3

⚡ Quick Answer: The Miele dryer F3 error indicates a malfunction in the heating element, specifically a short circuit in the drying air temperature sensor. This can l... ✅ DIY Fixable

What Does Error F3 Mean?

The Miele dryer F3 error indicates a malfunction in the heating element, specifically a short circuit in the drying air temperature sensor. This can lead to the dryer not producing heat during the drying cycle, often resulting in the dryer stopping operation when the error code appears.

Common Symptoms:

  • Display shows error code F3.
  • Dryer may stop operation when code appears.

Possible Causes

  • Short circuit in the drying air/process air temperature sensor circuit (high)

How to Fix Error F3

DIY Fix Power reset and basic checks

  1. Turn off the dryer and disconnect it from mains power for at least 5 minutes.
  2. Reconnect power and attempt to restart a short cycle to see if the error clears.

Technician Only Replace or repair the drying air temperature sensor and inspect associated wiring

  1. Disconnect mains power to the dryer.
  2. Access the drying air temperature sensor (process air temperature sensor) within the dryer.
  3. Test the sensor and associated wiring for short circuits and continuity with a multimeter.
  4. Replace the sensor if faulty, and repair any damaged wiring.
  5. Reassemble and test the dryer for proper operation.

Parts needed: Drying air/process air temperature sensor, Associated wiring/connectors

🛑 When to Call a Pro:
  • If the error persists after a power reset.
  • If the dryer will not complete drying cycles or shows additional error codes.
  • If you are not experienced with appliance electrical diagnostics.

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-30 ohms
part_number Miele 11021300
voltage_rating 240V AC

Common Questions

What does F3 error mean on Miele dryer?

F3 error indicates a malfunction in the heating element due to a short circuit in the drying air temperature sensor.

Can I fix Miele dryer F3 error myself?

Yes, you can attempt a power reset by turning off the dryer and disconnecting it for at least 5 minutes.

How much does it cost to fix F3 error?

Repair costs vary based on the model; the sensor part is typically moderate, with additional service call fees.

When should I call a technician for F3?

Call a technician if the error persists after a power reset, if drying cycles are incomplete, or if you're not experienced with electrical diagnostics.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!