Miele Dryer Error F22

What Does Error F22 Mean?

The Miele dryer error F22 indicates a malfunction in the heating element, preventing the dryer from generating heat during its operation. This issue can lead to inadequate drying performance. If you encounter this error, a basic reset may help; however, if the problem persists, further investigation is required.

Possible Causes

• Heating Element

How to Fix Error F22

DIY Fix Basic checks and reset

1. Turn the dryer off and disconnect it from power for a few minutes
2. Reconnect and restart a drying cycle

Technician Only Contact Miele Support

1. Contact Miele customer service or an authorized Miele technician
2. Provide the exact model and the F22 error information displayed

🛑 When to Call a Pro:

• If the error persists after basic reset attempts
• If there are signs of malfunction (unusual noises, no operation)

Next step

Choose the next step for F22

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Heating Element

Heats the water or air inside the appliance to the required temperature.

Typical part-only price

$40 - $95

DIY difficulty

Medium

Estimated time

30-45 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dryer parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dryer Vent Cleaning Kit

Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.

View maintenance supply

Maintenance supply

Lint Trap Cleaning Brush

A narrow brush for routine cleaning around an accessible lint screen and housing.

View maintenance supply

Maintenance supply

Dryer Vent Hose Kit

A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage	3000W
component	Heating Element
resistance	10-30 ohms
part_number	Miele 10124430
voltage_rating	240V AC

Common Questions

What does F22 error mean on Miele dryer?

The F22 error on a Miele dryer signifies a heating element failure, causing a lack of heat during drying.

Can I fix Miele dryer F22 error myself?

Yes, you can attempt a basic reset by disconnecting power for a few minutes, then reconnecting and restarting the dryer.

How much does it cost to fix F22 error?

Repair costs for the F22 error can vary based on model and region; specific estimates are not available.

When should I call a technician for F22?

Call a technician if the error continues after a reset or if you notice unusual noises or other malfunctions.

Data last verified: 2026-07-25