Miele Dryer Error F2
⚡ Quick Answer: The Miele dryer F2 error indicates a malfunction in the temperature sensing circuit, often due to an open circuit or interruption in the NTC temperatu... ⚠️ Difficulty Varies
What Does Error F2 Mean?
The Miele dryer F2 error indicates a malfunction in the temperature sensing circuit, often due to an open circuit or interruption in the NTC temperature sensor. This typically results in the dryer failing to produce heat, leading to cycles aborting or only air-dry functions operating. Immediate inspection of the sensor and wiring is advised to resolve the issue effectively.
Common Symptoms:
- Dryer stops heating or aborts cycle when F2 appears.
- Heater may not activate and only air‑dry functions operate.
Possible Causes
- Open circuit or interruption at a temperature sensor (NTC) (high)
- Wiring connection issue to temperature sensor (e.g., loose connector, broken wire) (medium)
How to Fix Error F2
DIY Fix Basic checks before calling service
- Power off and unplug the dryer.
- Visually inspect accessible vents and filter areas for moisture or lint buildup that might affect sensors.
- Ensure the dryer is completely dry and reconnect power to see if the error persists.
Technician Only Inspect and replace faulty temperature sensor or wiring
- Disconnect power and open access panels.
- Locate the temperature/NTC sensors and inspect for continuity using a multimeter.
- Check wiring harness and connectors for continuity and damage.
- Replace any open/defective sensor or damaged wiring as needed.
- Reassemble and test the dryer for error code resolution.
Parts needed: NTC temperature sensor, Wiring harness/connectors
- If error code persists after basic checks or if you are not trained in appliance repair.
- If internal wiring or sensor failure is suspected; internal electrical work should only be done by a qualified technician.
Next step
Choose the next step for F2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Miele 7131050 |
| voltage_rating | 240V AC |
Common Questions
What does F2 error mean on miele dryer?
F2 error indicates a malfunction in the temperature sensing circuit, causing the dryer to stop heating.
Can I fix miele dryer F2 error myself?
Yes, power off the dryer and check for moisture or lint buildup. If the error persists, professional help is recommended.
How much does it cost to fix F2 error?
Repair costs for F2 error typically range from $100 to $300, depending on parts and labor.
When should I call a technician for F2?
Call a technician if the F2 error persists after basic checks or if internal wiring issues are suspected.
Sources & References
- Miele Austria Support – Fehler F2 (official)
- Miele UK Support – Fault F2 on tumble dryer (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!