Miele Dryer Error F19

⚡ Quick Answer: The Miele dryer F19 error code signifies a malfunction in the moisture sensing system, leading to issues such as the dryer stopping early, clothes rem... ✅ DIY Fixable

What Does Error F19 Mean?

The Miele dryer F19 error code signifies a malfunction in the moisture sensing system, leading to issues such as the dryer stopping early, clothes remaining damp, or the error code frequently appearing during cycles. This typically indicates a problem with the moisture sensor, which may be contaminated or faulty, affecting its ability to accurately evaluate humidity levels in the drum.

Common Symptoms:

  • Dryer stops early or ends cycle prematurely
  • Clothes remain damp despite cycle completion
  • F19 appears on display often during or after drying cycle

Possible Causes

  • Moisture sensor contamination or fault (medium)
  • Poor grounding of drum affecting moisture detection (low)
  • Faulty moisture sensing circuit or wiring (low)

How to Fix Error F19

DIY Fix Basic moisture sensor inspection and cleaning

  1. Disconnect the dryer from power
  2. Open the dryer door and locate the moisture sensor bars inside the drum
  3. Clean the sensor bars with a mild abrasive or vinegar solution to remove fabric softener residue and buildup
  4. Wipe dry and ensure no residue remains
  5. Reconnect power and run a short drying cycle to check if F19 returns

Technician Only Inspect and repair moisture sensor circuit and grounding

  1. Disconnect dryer from power
  2. Remove access panels to inspect moisture sensor wiring harness and connections
  3. Measure continuity of grounding strap/carbon brush assembly to ensure proper drum grounding
  4. Test moisture sensor and control board moisture sensing circuit for faults
  5. Replace defective sensor components or wiring as needed

Parts needed: Moisture sensor bars, Drum grounding strap/carbon brushes, Wiring harness, Control board moisture sensing circuit components

🛑 When to Call a Pro:
  • If error persists after cleaning sensors
  • If internal component testing reveals sensor or wiring faults beyond basic cleaning

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-20 ohms
part_number Miele 6110330
voltage_rating 240V AC

Common Questions

What does F19 error mean on Miele dryer?

F19 indicates a malfunction in the moisture sensing system, causing early cycle stops and damp clothes.

Can I fix Miele dryer F19 error myself?

Yes, you can inspect and clean the moisture sensor bars to resolve the F19 error.

How much does it cost to fix F19 error?

Estimated repair costs range from $100 to $400, depending on the issue.

When should I call a technician for F19?

Call a technician if the error persists after cleaning or if internal components are faulty.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!