Miele Dryer Error F16
⚡ Quick Answer: The Miele dryer error F16 indicates a fault in the drum motor speed feedback system, often preventing the dryer from starting or causing it to stop sh... ✅ DIY Fixable
What Does Error F16 Mean?
The Miele dryer error F16 indicates a fault in the drum motor speed feedback system, often preventing the dryer from starting or causing it to stop shortly after beginning a cycle. Symptoms include the dryer not starting, stopping unexpectedly, and irregular drum spinning. This issue is typically linked to the motor tachometer or speed feedback sensor malfunctioning, which may require professional inspection or replacement.
Common Symptoms:
- Dryer may not start at all
- Dryer may stop shortly after starting
- Error F16 displayed immediately or soon after cycle start
- Drum may not spin or spin irregularly
Possible Causes
- Motor tachometer/speed feedback sensor fault or wiring issue (medium)
How to Fix Error F16
DIY Fix Perform Basic Checks Before Service Call
- Turn the dryer off and unplug it from the power source.
- Check that the drum spins freely by hand (no unusual resistance).
- Ensure lint filters and vents are clean to eliminate airflow restrictions.
- Plug the dryer back in and attempt a new cycle.
Technician Only Inspect/Replace Motor Tachometer and Related Components
- Disconnect power and remove appropriate panels to access the motor assembly.
- Inspect the tachometer/speed sensor on the motor and wiring harness for damage or loose connections.
- Test sensor output with proper diagnostic tools (multimeter/oscilloscope) while manually rotating the motor shaft.
- Replace the motor assembly if sensor or motor fault is confirmed.
Parts needed: Drive motor with integrated tachometer/speed sensor, Wiring harness/connectors
- If the dryer displays F16 persistently after basic checks
- If you are not comfortable opening and diagnosing internal components
- If motor/encoder testing is required
Next step
Choose the next step for F16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drive Motor
Drives the drum, agitator, or pump to rotate during cycles.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 45-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Miele 11512300 |
| voltage_rating | 240V AC |
Common Questions
What does F16 error mean on Miele dryer?
F16 indicates a fault with the drum motor's speed feedback, causing the dryer to not start or to stop shortly after starting.
Can I fix Miele dryer F16 error myself?
Yes, you can perform basic checks like ensuring the drum spins freely and cleaning lint filters before calling for service.
How much does it cost to fix F16 error?
Repair costs are medium to high, as motor assemblies are among the more expensive components to replace.
When should I call a technician for F16?
Call a technician if F16 persists after basic checks or if you're uncomfortable diagnosing internal components.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!