Maytag Washing Machine Error Ld

⚡ Quick Answer: The Maytag washing machine error code Ld indicates a long drain issue, where the washer is unable to drain water from the tub within the expected time... ✅ DIY Fixable

What Does Error Ld Mean?

The Maytag washing machine error code Ld indicates a long drain issue, where the washer is unable to drain water from the tub within the expected time frame. Symptoms include the washer stopping mid-cycle, water remaining in the tub for too long, and an abnormally long drain cycle. This can be caused by improper drain hose installation, a clogged or obstructed drain hose, or a malfunctioning drain pump.

Common Symptoms:

  • Washer stops mid‑cycle with Ld displayed
  • Water remains in tub too long before draining
  • Drain cycle runs abnormally long

Possible Causes

  • Drain hose installation issue or improper height (high)
  • Clogged or obstructed drain hose or drain pump (high)
  • Drain pump malfunction or failure (medium)

How to Fix Error Ld

DIY Fix Check basic drainage setup

  1. Unplug washer and turn off power.
  2. Inspect drain hose for kinks, bends, or blockages.
  3. Ensure drain hose end is installed correctly and not inserted deeper than recommended into standpipe.
  4. Verify drain hose height meets manufacturer specification (e.g., above 36 inches).

DIY Fix Clear clogs and debris

  1. Move washer if needed to access drain connections.
  2. Disconnect drain hose and inspect for clogs; clear with water or flexible brush.
  3. Check pump inlet area for obstructions and remove debris.
  4. Reconnect hoses securely and test a drain cycle.

Technician Only Test and replace drain pump if faulty

  1. Disconnect power and access drain pump assembly.
  2. Test pump operation and electrical continuity.
  3. Replace drain pump if it fails to run or shows electrical issues.

Parts needed: Drain pump assembly, Pump gasket/clamps

🛑 When to Call a Pro:
  • If pump testing or internal access requires specialized tools beyond basic homeowner capability
  • If error persists after clearing hoses and verifying installation

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number W10730972
voltage_rating 120V AC

Common Questions

What does Ld error mean on Maytag washing machine?

The Ld error indicates a long drain issue, where the washer cannot drain water in the expected time.

Can I fix Maytag washing machine Ld error myself?

Yes, you can check the drain hose for kinks or clogs and ensure proper installation.

How much does it cost to fix Ld error?

The estimated cost to fix the Ld error ranges from $50 to $200, depending on parts and labor.

When should I call a technician for Ld?

Call a technician if the pump requires specialized tools or if the error persists after checking hoses.

Sources & References

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!