Maytag Washing Machine Error F01
⚡ Quick Answer: The Maytag washing machine F01 error code signifies a failure in the electronic control board or a communication issue between components. Symptoms in... ✅ DIY Fixable
What Does Error F01 Mean?
The Maytag washing machine F01 error code signifies a failure in the electronic control board or a communication issue between components. Symptoms include the washer not starting, interrupted cycles, or the error appearing during power-up. Common causes include a malfunctioning control board, power fluctuations, or loose wiring connections. Addressing these issues promptly can restore your washer's functionality.
Common Symptoms:
- Washer won’t start or operate normally when F01 is displayed
- Cycle interrupted or cancelled mid‑cycle
- Display shows error upon power up or during use
Possible Causes
- Electronic control board (CCU/main control board) malfunction or failure (medium)
- Power surge, fluctuation, or temporary electrical glitch (medium)
- Loose or damaged wiring harness/connectors between control and components (medium)
How to Fix Error F01
DIY Fix Basic reset and power check
- Unplug the washer from the power outlet.
- Wait at least 1–5 minutes.
- Plug the washer back in and power it on.
- Observe if the F01 error returns.
Technician Only Inspect control board, wiring, and replace if needed
- Disconnect power and access the control board compartment.
- Inspect wiring harness connectors for looseness, corrosion, or damage.
- Test communication between main control board and interface/motor boards.
- Replace malfunctioning control board or wiring as diagnosed.
Parts needed: Main control board (CCU), Wiring harness/connectors
- If error persists after basic reset and visual inspection of accessible components.
- If you are not comfortable accessing internal electrical components.
Next step
Choose the next step for F01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Control Board |
| resistance | N/A |
| part_number | W10400895 |
| voltage_rating | 120V AC |
Common Questions
What does F01 error mean on Maytag washing machine?
F01 indicates a control board failure or communication issue, causing the washer to be unresponsive.
Can I fix Maytag washing machine F01 error myself?
Yes, you can perform a basic reset by unplugging the washer, waiting 1-5 minutes, and plugging it back in.
How much does it cost to fix F01 error?
Estimated repair costs range from $200 to $400, depending on parts and labor.
When should I call a technician for F01?
Call a technician if the error persists after a reset or if you're uncomfortable accessing internal components.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!