Maytag Washing Machine Error F02
⚡ Quick Answer: The Maytag washing machine error code F02 indicates a drain system failure, meaning the washer is unable to drain water within the expected time frame... ✅ DIY Fixable
What Does Error F02 Mean?
The Maytag washing machine error code F02 indicates a drain system failure, meaning the washer is unable to drain water within the expected time frame. Symptoms include the machine stopping mid-cycle with water still in the drum and the display showing the F02 error during drain or spin phases. Common causes are a clogged drain hose or pump filter and a faulty drain pump.
Common Symptoms:
- Washer stops mid‑cycle with water still in the drum.
- Display shows F02 or F2 during drain/spin phases.
- Long drain times or inability to drain water completely.
Possible Causes
- Clogged or obstructed drain hose or pump filter (medium)
- Faulty or impaired drain pump (medium)
How to Fix Error F02
DIY Fix Basic Drain System Inspection
- Power off and unplug the washer.
- Check the drain hose for kinks, bends, or visible blockages and straighten or clear as needed.
- Locate and clean any accessible drain pump filter or debris trap according to your model’s manual.
- Restart the machine and run a drain/spin cycle to test.
Technician Only Professional Drain Pump and Internal Component Evaluation
- Disassemble lower access panel to inspect drain pump operation and check for internal blockages or damage.
- Test drain pump motor and impeller for proper rotation and electrical continuity.
- Inspect associated hoses and connections for restrictions or damage; replace parts as needed.
Parts needed: drain pump assembly, drain hoses, pump filter components
- If the error persists after clearing visible clogs and checking hoses.
- If the drain pump fails electrical or mechanical testing.
- If water leaks occur during diagnostic steps.
Next step
Choose the next step for F02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | W10730972 |
| voltage_rating | 120V AC |
Common Questions
What does F02 error mean on Maytag washing machine?
The F02 error indicates a drain system failure, meaning the washer cannot drain water properly.
Can I fix Maytag washing machine F02 error myself?
Yes, you can inspect the drain hose for blockages and clean the drain pump filter.
How much does it cost to fix F02 error?
The estimated repair cost is moderate and varies based on part costs and labor.
When should I call a technician for F02?
Call a technician if the error persists after troubleshooting or if the drain pump fails testing.
Sources & References
- Maytag Washer Error F02: Insight (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!