Maytag Washing Machine Error F06
⚡ Quick Answer: The Maytag washing machine F06 error code indicates a communication fault between the motor control unit and the motor tachometer. This issue often ma... ✅ DIY Fixable
What Does Error F06 Mean?
The Maytag washing machine F06 error code indicates a communication fault between the motor control unit and the motor tachometer. This issue often manifests as the drum failing to spin or rotate at the cycle start, and the washer may stop mid-cycle. Unusual sounds may also be present during operation. To address this, check for loose or damaged wiring connections, as well as possible faults in the motor control board or the drive motor itself.
Common Symptoms:
- Drum does not spin or rotate at cycle start
- Washer stops mid‑cycle showing F06
- Spin cycle failure
Possible Causes
- Motor tachometer / motor control communication fault (high)
- Loose, corroded or damaged motor/motor control harness connections (medium)
- Faulty motor control board (MCU) (medium)
- Failed or failing drive motor / tachometer sensor (medium)
How to Fix Error F06
DIY Fix Basic user troubleshooting
- Unplug washer from power for a few minutes to reset error
- Ensure load is balanced and not overloaded
- Visually inspect accessible wiring at rear panel for obvious loose connections (unplug first)
Technician Only Professional diagnostic and repair
- Test motor tachometer and motor control board with multimeter per service manual procedures
- Inspect and secure or repair motor/Motor Control Unit (MCU)/Central Control Unit (CCU) wiring harnesses
- Replace faulty motor control board or drive motor if diagnostic tests confirm failure
Parts needed: motor control board (MCU), drive motor with integrated tachometer, wiring harnesses
- If error persists after basic resets and load adjustments
- If internal electrical diagnostics show abnormal readings
- If wiring damage or burned components are found
Next step
Choose the next step for F06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drive Motor
Drives the drum, agitator, or pump to rotate during cycles.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 500W |
|---|---|
| component | Motor Control Unit |
| resistance | 10-30 ohms |
| part_number | W10655368 |
| voltage_rating | 120V AC |
Common Questions
What does F06 error mean on Maytag washing machine?
F06 indicates a motor control communication error, often preventing the drum from spinning.
Can I fix Maytag washing machine F06 error myself?
Yes, try resetting the washer and checking for loose connections before calling a technician.
How much does it cost to fix F06 error?
Repair costs range from $150 to $500, depending on parts and labor in your area.
When should I call a technician for F06?
Call a technician if the error persists after resets or if you find wiring damage.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!