Maytag Washing Machine Error F35
⚡ Quick Answer: The Maytag washing machine F35 error code indicates a failure in the water level sensor, often resulting in erratic filling behavior or the washer bei... ⚠️ Difficulty Varies
What Does Error F35 Mean?
The Maytag washing machine F35 error code indicates a failure in the water level sensor, often resulting in erratic filling behavior or the washer being unable to fill. This issue typically stems from a malfunctioning analog pressure sensor or a blockage in the pressure hose. Symptoms may include the washer stopping mid-cycle, aborting cycles, or displaying a SUD error prior to the F35. Ensuring the pressure hose is clear and checking the sensor can help resolve this error.
Common Symptoms:
- Washer stops mid‑cycle and displays F35
- May be preceded by a SUD or Suds error
- Washer may not fill, may abort cycle or fail to advance
Possible Causes
- Analog pressure sensor (water level switch) fault (medium)
- Blocked, kinked, or damaged pressure hose / air dome tube (medium)
- Control board communication or related harness fault (low)
How to Fix Error F35
DIY Fix Basic checks and reset
- Unplug washer or turn off circuit breaker for 30+ seconds
- Reconnect power and attempt to clear error by selecting a cycle and starting
Technician Only Inspect and service pressure switch and related components
- Remove access panels to locate analog pressure sensor and pressure hose
- Inspect pressure hose for kinks, blockages or water inside
- Test sensor and hose continuity (blow test) and continuity with multimeter
- Replace pressure sensor and/or hose if defective
- Check wiring harness connections between pressure switch and control board
Parts needed: Analog pressure sensor (Maytag part), Pressure hose / air dome tube, Wiring harness as needed
- If F35 persists after inspecting and replacing pressure components
- If unable to safely access internal components or test with tools
Next step
Choose the next step for F35
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F35 error mean on Maytag washing machine?
F35 indicates a water level sensor failure, causing erratic filling or inability to fill.
Can I fix Maytag washing machine F35 error myself?
Yes, you can try unplugging the machine for 30 seconds to reset it and check the pressure hose for blockages.
How much does it cost to fix F35 error?
Repair costs range from $50 to $300, depending on parts and labor needed.
When should I call a technician for F35?
Call a technician if the error persists after checking components or if you're unable to safely access the machine's internals.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!