Maytag Washing Machine Error F33
⚡ Quick Answer: The Maytag washing machine error F33 indicates a malfunction in the pump drive and pressure communication system, affecting water drainage and level s... ✅ DIY Fixable
What Does Error F33 Mean?
The Maytag washing machine error F33 indicates a malfunction in the pump drive and pressure communication system, affecting water drainage and level sensing. Symptoms include the washer stopping mid-cycle, failure to drain water, and the error appearing during fill or drain operations. This issue may arise from problems with the drain pump communication, wiring failures, or faults in the pressure switch system.
Common Symptoms:
- Washer stops mid‑cycle
- Water may not drain
- Error displayed during or after fill or drain operations
Possible Causes
- Drain pump communication/failure or wiring issue (medium)
- Pressure/pressure switch system fault (medium)
How to Fix Error F33
DIY Fix Basic user checks for F33
- Turn off and unplug the washer.
- Check for visible kinks, clogs, or restrictions in the drain hose.
- Ensure the washer isn’t overloaded.
- Power cycle the washer by unplugging for several minutes then restart to see if the code clears.
Technician Only Technician inspection and repair for F33
- Verify wiring harness and connections between drain pump, pressure switch, and control board.
- Inspect and test the drain pump for operation; clean or replace if faulty.
- Check pressure switch and associated pressure hose for blockages or damage.
- Use diagnostic tools to check for communication faults between components.
Parts needed: Drain pump assembly, Wiring harness/connectors, Pressure switch and hose
- If internal disassembly beyond hose inspection is required
- If error persists after basic checks
- If water is not draining at all
Next step
Choose the next step for F33
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F33 error mean on Maytag washing machine?
The F33 error indicates a malfunction in the pump drive and pressure communication system, affecting water drainage and level sensing.
Can I fix Maytag washing machine F33 error myself?
Yes, you can perform basic checks such as inspecting the drain hose for kinks or clogs and ensuring the washer isn’t overloaded.
How much does it cost to fix F33 error?
The estimated repair cost for the F33 error ranges from $80 to $300, depending on the parts needed and labor costs.
When should I call a technician for F33?
You should call a technician if internal disassembly is required, if the error persists after basic checks, or if the washer isn't draining at all.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!