Maytag Washing Machine Error F32

⚡ Quick Answer: The Maytag washing machine error F32 indicates a long drain or drainage-related fault. This typically occurs when the washer is unable to drain water ... ✅ DIY Fixable

What Does Error F32 Mean?

The Maytag washing machine error F32 indicates a long drain or drainage-related fault. This typically occurs when the washer is unable to drain water effectively, leading to symptoms such as the washer stopping mid-cycle, water remaining in the tub, and delayed progression to the next wash phase. Common causes include a malfunctioning drain pump, clogged drain hose, or issues with the pressure switch or water level sensor.

Common Symptoms:

  • Washer stops mid‑cycle and displays F32
  • Water remains in the tub after a drain cycle
  • Extended time draining before fault displays
  • Possible failure to progress to next wash phase

Possible Causes

  • Drain pump not effectively removing water or pump impairment (high)
  • Clogged or restricted drain hose / plumbing (medium)
  • Faulty pressure switch or water level sensor (medium)

How to Fix Error F32

DIY Fix Check and clear basic drain issues

  1. Power off and unplug the washer.
  2. Inspect the drain hose for kinks, sharp bends, or visible blockages.
  3. Ensure the drain hose is correctly installed and at proper height per your manual.
  4. Remove any debris from accessible drain filters or trap areas.

Technician Only Inspect and test drain pump and pressure system

  1. Disconnect power and tilt or access the washer’s lower panel to reach the drain pump.
  2. Check pump impeller for damage or obstruction; replace the pump if impeller blades are broken or operation is weak.
  3. Test continuity and operation of the pressure switch and associated hose; replace if faulty.
  4. Verify wiring and connectors to pump and control board.

Parts needed: Drain pump, Pressure switch (if applicable), Drain hose and connectors

🛑 When to Call a Pro:
  • If water is flooding, leaking, or the pump sounds unusual (grinding, stalled)
  • If you cannot access internal components safely
  • If replacing obvious blockages and basic checks do not resolve the code

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number W10810403
voltage_rating 120V AC

Common Questions

What does F32 error mean on Maytag washing machine?

The F32 error indicates a long drain issue, where the washer fails to drain properly, causing it to stop mid-cycle.

Can I fix Maytag washing machine F32 error myself?

Yes, you can check for kinks or blockages in the drain hose and ensure it's properly installed.

How much does it cost to fix F32 error?

Repair costs typically range from $80 to $250+, depending on parts and labor.

When should I call a technician for F32?

Call a technician if you notice flooding, unusual pump sounds, or if basic checks don't resolve the issue.

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!