Maytag Washing Machine Error F27
⚡ Quick Answer: The Maytag washing machine error F27 signifies an overflow condition, where the unit detects excessive water or pressure in the tub. This can cause th... ✅ DIY Fixable
What Does Error F27 Mean?
The Maytag washing machine error F27 signifies an overflow condition, where the unit detects excessive water or pressure in the tub. This can cause the washer to halt mid-cycle, often accompanied by excess water or suds in the drum. The cycle will not progress until the issue is resolved, typically due to a malfunctioning water level sensor or a blockage in the drain system.
Common Symptoms:
- Washer stops mid-cycle and displays F27
- Excess water/suds in drum
- Cycle will not advance until condition resolved
Possible Causes
- Overflow/Overfill detected due to too much water or suds (medium)
- Drain blockage causing water not to evacuate properly (low)
How to Fix Error F27
DIY Fix Check for overfill and reset
- Stop the washer and open the lid once safe to do so
- Remove excess water/suds manually if present
- Unplug the washer for 1–5 minutes and plug back in to reset controls
- Restart the cycle with normal load size
Technician Only Inspect drain system and pressure switch
- Check and clear drain hose, pump, and filter for blockages
- Test the water pressure switch for correct operation
- Verify control board correctly reads pressure switch signals
Parts needed: Drain hose, Drain pump, Water pressure switch, Control board (if needed)
- If repeated resets do not clear the error
- If water won’t drain or F27 returns immediately after beginning a cycle
Next step
Choose the next step for F27
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F27 error mean on Maytag washing machine?
F27 indicates an overflow condition due to too much water or pressure detected in the tub.
Can I fix Maytag washing machine F27 error myself?
Yes, you can check for overfill, manually remove excess water, and reset the machine.
How much does it cost to fix F27 error?
Estimated repair costs for the F27 error range from $100 to $350.
When should I call a technician for F27?
Call a technician if repeated resets do not clear the error or if water won’t drain.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!