Maytag Washing Machine Error F25
⚡ Quick Answer: The Maytag washing machine error F25 signals a problem with the drive motor tachometer, leading to issues with detecting the motor's speed. This can c... ✅ DIY Fixable
What Does Error F25 Mean?
The Maytag washing machine error F25 signals a problem with the drive motor tachometer, leading to issues with detecting the motor's speed. This can cause the washer to stop mid-cycle, fail to spin correctly, or display the error shortly after starting a wash. Common causes include a faulty tachometer, damaged wiring, or a malfunctioning motor control unit. Addressing these issues promptly is crucial to restoring normal operation.
Common Symptoms:
- Washer stops mid‑cycle
- Drum does not spin properly
- Error displayed at spin or shortly after start
Possible Causes
- Faulty drive motor tachometer (speed sensor) (medium)
- Loose or damaged wiring/harness between motor and control boards (medium)
- Faulty motor control unit (MCU) / control board (medium)
How to Fix Error F25
DIY Fix Basic verification & reset
- Turn off the washer and unplug it from power for at least 1 minute.
- Inspect that the washer is not overloaded with laundry.
- Plug the washer back in and restart a cycle to see if the error clears.
Technician Only Inspect and test motor tachometer and wiring
- Disconnect power and remove access panels to reach the drive motor and motor control unit.
- Check the motor harness and connectors for damage, corrosion, or poor seating.
- Measure the tachometer resistance with a multimeter (approximately 115 ohms expected per community sources).
- Replace the drive motor tachometer if out of specification.
- If wiring and sensor test within range but error persists, inspect/replace the motor control unit.
Parts needed: Motor tachometer/sensor, Motor control unit (MCU), Wiring harness/connectors
- If you are uncomfortable accessing internal parts or lack tools to safely test electrical components.
- If the error persists after checking wiring and basic reset attempts.
- If signs of burnt components or corrosion are visible on control boards.
Next step
Choose the next step for F25
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F25 error mean on Maytag washing machine?
The F25 error indicates a drive motor tachometer malfunction, causing the washer to stop midway or fail to spin.
Can I fix Maytag washing machine F25 error myself?
Yes, you can try basic troubleshooting like resetting the machine and checking for overloads.
How much does it cost to fix F25 error?
Repair costs for the F25 error range from $150 to $400+, depending on the parts and service rates.
When should I call a technician for F25?
Call a technician if the error persists after basic troubleshooting or if you notice burnt components.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!