Maytag Washing Machine Error F24
⚡ Quick Answer: The Maytag washing machine error code F24 indicates a failure in the water temperature sensor, which affects the washer's ability to detect and mainta... ✅ DIY Fixable
What Does Error F24 Mean?
The Maytag washing machine error code F24 indicates a failure in the water temperature sensor, which affects the washer's ability to detect and maintain optimal water temperature. This error may cause the machine to stop mid-cycle, fail to heat water, or not proceed with the wash cycle. Checking the connections and ensuring the sensor is functioning correctly is crucial for resolving this issue.
Common Symptoms:
- Washer stops mid‑cycle with F24 displayed
- Machine unable to correctly detect water temperature
- May fail to heat water or proceed in wash cycle
Possible Causes
- Faulty water temperature sensor (NTC) (medium)
- Loose, corroded, or damaged wiring to the temperature sensor (medium)
- Heating circuit or control board communication fault (low)
How to Fix Error F24
DIY Fix Basic reset and check
- Unplug the washer from power or turn off circuit breaker for at least 1–2 minutes (reset).
- Plug the washer back in and restart a cycle to see if the F24 code clears
- Ensure load isn’t overloaded and water supply is normal
Technician Only Inspect and replace temperature sensor
- Disconnect power to the washer
- Remove lower access panel and locate the water temperature sensor near the wash tub/heating element area (per technician guidance).
- Use a multimeter to test sensor resistance against expected values
- Replace sensor if readings are out of range or visibly damaged
- Inspect and secure wiring connections to sensor and control board
Parts needed: Water temperature sensor (NTC), Wiring harness/connectors
- Error persists after reset and basic checks
- Sensor tests out of specification on multimeter
- Evidence of wiring harness damage or control board communication issues
Next step
Choose the next step for F24
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F24 error mean on Maytag washing machine?
F24 indicates a failure in the water temperature sensor, causing the washer to stop mid-cycle.
Can I fix Maytag washing machine F24 error myself?
Yes, you can try resetting the washer and checking the water supply and load before seeking professional help.
How much does it cost to fix F24 error?
Repair costs for the F24 error range from $50 to $150 for the sensor part, plus labor.
When should I call a technician for F24?
Call a technician if the error persists after resetting, or if there are issues with the wiring or control board.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!