Maytag Washing Machine Error F23
⚡ Quick Answer: The Maytag washing machine error code F23 indicates a potential failure in the door lock mechanism or issues with heating, temperature sensing, or pre... ✅ DIY Fixable
What Does Error F23 Mean?
The Maytag washing machine error code F23 indicates a potential failure in the door lock mechanism or issues with heating, temperature sensing, or pressure detection. This error may cause the machine to stop mid-cycle, fail to heat water, or be unable to complete temperature-sensitive wash cycles. To resolve this, basic troubleshooting like resetting the machine and checking connections is recommended, but further diagnostics may be necessary for complex issues.
Common Symptoms:
- F23 appears on the display and the washer may stop mid‑cycle or fail to heat water (community reports)
- Washer may be unable to complete certain wash or temperature‑sensitive cycles (community reports)
Possible Causes
- No official cause documented (low)
- Possible heating element or temperature sensor/thermistor issue (low)
- Possible pressure switch / water level detection issue (low)
How to Fix Error F23
DIY Fix Basic reset and checks
- Unplug the washer from power for several minutes to clear transient faults.
- Ensure the washer’s model number is noted before seeking official documentation.
- Verify correct water supply connections and that hoses are not kinked.
Technician Only Diagnostics with model‑specific service manual
- Retrieve the exact Maytag model number and locate the appropriate service manual for F‑code definitions.
- Use a multimeter to test continuity of temperature sensor/thermistor and heating element if applicable.
- Inspect wiring harnesses, connectors, and pressure switch for faults or corrosion.
- Replace only the component verified as defective per service manual diagnostics.
Parts needed: Temperature sensor / thermistor, Heating element (if applicable), Pressure switch / water level sensor, Wiring harnesses / connectors
- If the error persists after basic resets and safe user checks.
- If any internal electrical component tests reveal open circuits or shorts.
- If you are uncomfortable performing continuity checks or internal diagnostics.
Next step
Choose the next step for F23
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F23 error mean on Maytag washing machine?
F23 indicates a potential failure in the door lock mechanism or heating issues, causing the machine to stop mid-cycle.
Can I fix Maytag washing machine F23 error myself?
Yes, you can try basic resets and ensure proper water supply connections before seeking professional help.
How much does it cost to fix F23 error?
Repair costs typically range from $100 to $350, depending on parts and labor.
When should I call a technician for F23?
Call a technician if the error persists after basic troubleshooting or if you're uncomfortable performing internal diagnostics.
Sources & References
- Maytag Error Codes — Official Product Help (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!