Maytag Washing Machine Error F20
⚡ Quick Answer: The Maytag washing machine error code F20 indicates a water inlet problem, where the washer fails to fill with adequate water. This issue may arise fr... ✅ DIY Fixable
What Does Error F20 Mean?
The Maytag washing machine error code F20 indicates a water inlet problem, where the washer fails to fill with adequate water. This issue may arise from closed water supply valves, low household water pressure, clogged inlet hoses or screens, or a defective water inlet valve. To resolve this, ensure that both hot and cold water valves are fully open, check hoses for kinks, and clean any debris from the inlet screens. If the error persists after resetting the washer, further inspection of internal components may be necessary.
Common Symptoms:
- Washer displays F20 during or shortly after start of fill cycle
- Machine fails to fill with sufficient water
- Cycle may cancel or drain without progressing due to lack of water
Possible Causes
- Water supply valves shut or insufficient household water pressure (high)
- Clogged or kinked inlet hoses or inlet screens (high)
- Faulty water inlet valve (medium)
- Faulty pressure switch or flow sensing (medium)
How to Fix Error F20
DIY Fix Check basic water supply and connections
- Ensure both hot and cold water supply valves are fully open
- Inspect inlet hoses for kinks or sharp bends and straighten them
- Disconnect hoses and check the small inlet screens for debris; clean if clogged
- Confirm household water pressure is adequate by testing nearby faucets
DIY Fix Reset washer to clear error
- Press PAUSE/CANCEL twice to stop current cycle (if available)
- Unplug the washer or turn off breaker for 1–5 minutes
- Reconnect power and restart a wash cycle to see if F20 clears
Technician Only Test and replace internal components
- Disconnect power and water
- Inspect and test the water inlet valve for proper operation with multimeter; replace if faulty
- Check pressure switch and related hoses for continuity and correct signaling; replace if defective
Parts needed: Water inlet valve, Pressure switch / flow sensor
- If water supply and hose/screen cleaning do not clear error after reset
- If testing internal components or electrical parts is needed and you lack experience
Next step
Choose the next step for F20
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 20W |
|---|---|
| component | Water Inlet Valve |
| resistance | 2-3 ohms |
| part_number | W10648028 |
| voltage_rating | 120V AC |
Common Questions
What does F20 error mean on Maytag washing machine?
The F20 error means there is a problem with the water inlet, causing insufficient water fill.
Can I fix Maytag washing machine F20 error myself?
Yes, you can check water supply valves, inspect hoses for kinks, and clean inlet screens.
How much does it cost to fix F20 error?
Repair costs range from $50 to $250+, depending on parts and labor.
When should I call a technician for F20?
Call a technician if the error persists after basic troubleshooting or if you need help testing internal components.
Sources & References
- Maytag Front Load Washer F20 Error Code (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!