Maytag Washing Machine Error F18
⚡ Quick Answer: The Maytag washing machine error code F18 typically indicates a drain pump failure. This code may be accompanied by unusual noises during the drain cy... ✅ DIY Fixable
What Does Error F18 Mean?
The Maytag washing machine error code F18 typically indicates a drain pump failure. This code may be accompanied by unusual noises during the drain cycle, signaling an issue that needs attention. To address this, check your washer's model number and consult the owner's manual for guidance. If the error persists, a basic reset of the machine may clear the code. If problems continue, further diagnostics may be required.
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Control Board Issue
How to Fix Error F18
DIY Fix Check if Error Code Format Matches Your Model
- Verify your washer model number and consult the official owner’s manual for that specific model.
- Check whether your model uses the "F# E#" format or a different code set.
- If F18 appears as a system error code (general fault), attempt a basic reset: power washer off, wait 1–2 minutes, power back on.
Technician Only Run Diagnostics and Clear Code
- Enter service diagnostic mode for the specific Maytag model to read stored fault history.
- Attempt to clear the code via service menus and observe if persistent errors are logged.
- Check control board communication and internal sensor connections for intermittent faults.
Parts needed: Diagnostic interface (service panel), Wiring harnesses, Control board connectors
- If the F18 code remains after attempting a reset and basic checks.
- If the washer displays additional unusual behavior (no start, no water fill, locks etc.) along with the F18 code.
Next step
Choose the next step for F18
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | W10730972 |
| voltage_rating | 120V AC |
Common Questions
What does F18 error mean on Maytag washing machine?
F18 indicates a potential drain pump failure and may involve unusual noises during the drain cycle.
Can I fix Maytag washing machine F18 error myself?
Yes, you can try resetting the machine and checking the model for specific guidelines.
How much does it cost to fix F18 error?
Estimated repair costs range from $50 to $150, depending on the diagnostics needed.
When should I call a technician for F18?
Call a technician if the F18 code remains after resetting or if you notice additional unusual behaviors.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!