Maytag Washing Machine Error F16

⚡ Quick Answer: The F16 error code on a Maytag washing machine indicates a potential issue with the door lock mechanism. This malfunction can prevent the washer from ... ✅ DIY Fixable

What Does Error F16 Mean?

The F16 error code on a Maytag washing machine indicates a potential issue with the door lock mechanism. This malfunction can prevent the washer from starting, or the door may remain locked, hindering operation. To resolve this issue, it is essential to consult your specific model’s owner manual for error codes and troubleshooting steps.

Possible Causes

  • Door Lock Assembly
  • Wiring Issues
  • Control Board Malfunction

How to Fix Error F16

DIY Fix Verify if F16 is model‑specific code

  1. Check your specific washer model’s owner manual for error codes list.
  2. Look up F16 in the troubleshooting section of the manual or model‑specific tech sheet.
  3. If you have the service manual for your model, search for F16 in the diagnostic table.

Technician Only Check for undocumented/system error code

  1. Connect service diagnostics tool or enter the washer’s service mode if available.
  2. Record historical fault codes stored in memory to determine which subsystem triggered the fault.
  3. Inspect wiring harness connections and sensor communications if a controller detected an undefined code.

Parts needed: diagnostic service tool, multimeter

🛑 When to Call a Pro:
  • If the machine repeatedly shows F16 after basic resets
  • If the washer will not operate at all and the error persists

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number W10619844
voltage_rating 120V AC

Common Questions

What does F16 error mean on Maytag washing machine?

F16 indicates a malfunction in the door lock mechanism, preventing the washer from starting or locking the door.

Can I fix Maytag washing machine F16 error myself?

Yes, check your manual for specific error codes and troubleshooting steps related to the F16 error.

How much does it cost to fix F16 error?

Estimated repair costs for diagnosing the F16 error range from $50 to $150.

When should I call a technician for F16?

Call a technician if the F16 error persists after basic resets or if the washer is completely non-operational.

Sources & References

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!