Maytag Washing Machine Error F15
⚡ Quick Answer: The Maytag washing machine error code F15 indicates a malfunction related to the motor control board or internal control circuits. This error often re... ⚠️ Difficulty Varies
What Does Error F15 Mean?
The Maytag washing machine error code F15 indicates a malfunction related to the motor control board or internal control circuits. This error often results in the washer stopping mid-cycle, not proceeding until the error is reset, and may affect spinning or heating functions depending on the model. If this error appears, it is crucial to address potential issues with the control board or wiring connections to restore normal operation.
Common Symptoms:
- Washer stops mid‑cycle when F15 appears
- Cycle will not proceed until error is cleared/reset
- Washer may not spin or heat (depending on model)
Possible Causes
- Motor control board malfunction or related electronic control fault (medium)
- Internal control system error due to communication or sensor fault (medium)
How to Fix Error F15
DIY Fix Basic reset and check wiring/connectors
- Turn off and unplug the washer.
- Wait 2–5 minutes.
- Plug the washer back in and power it on to see if the F15 code clears.
- Check that rear access panels and harness connectors to boards are seated snugly (no loose wiring).
Technician Only Diagnose and replace faulty control board or motor control board
- Enter service/diagnostic mode per model instructions to retrieve stored fault codes.
- Inspect and test the motor control board and main control board communications.
- Verify continuity of board interconnections and inspect for visible damage (burn marks, blown components).
- Replace the identified faulty board (e.g., motor control board).
- After replacement, verify correct operation across multiple cycles.
Parts needed: Motor control board, Main control board
- If the error persists after basic reset and inspection of connectors
- If you are uncomfortable accessing internal boards or working near electrical components
- If diagnostic tests indicate board failures
Next step
Choose the next step for F15
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F15 error mean on Maytag washing machine?
F15 indicates a motor control board malfunction or internal control circuit fault, causing the washer to stop mid-cycle.
Can I fix Maytag washing machine F15 error myself?
Yes, try a basic reset by unplugging the washer for 2-5 minutes and checking wiring connections.
How much does it cost to fix F15 error?
Repair costs range from $150 to $400, depending on parts and labor in your region.
When should I call a technician for F15?
Call a technician if the error persists after a reset, if you're uncomfortable with electrical components, or if diagnostics indicate board failures.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!