Maytag Washing Machine Error F14
⚡ Quick Answer: The Maytag washing machine error F14 indicates a failure in the door lock mechanism, which may prevent the washer from starting. This issue can also b... ✅ DIY Fixable
What Does Error F14 Mean?
The Maytag washing machine error F14 indicates a failure in the door lock mechanism, which may prevent the washer from starting. This issue can also be related to a potential EEPROM or control memory fault on the main control board. Users may experience symptoms such as the washer freezing during a cycle or the error code F14 being displayed on the control panel.
Common Symptoms:
- Washer may not start
- Washer may freeze during a cycle
- Error code F14 displayed on control panel
Possible Causes
- Potential EEPROM or main control board memory corruption/failure (low)
How to Fix Error F14
DIY Fix Power Reset and Basic Checks
- Unplug the washing machine from the power source.
- Wait for 10 minutes to allow residual charge to dissipate.
- Plug the washer back in and attempt to start a short cycle.
Technician Only Control Board Inspection/Repair
- Disconnect power and remove access panels to reach the main control board.
- Inspect the main control board and EEPROM for visible damage, burnt components, or connector issues.
- Reseat all connectors to the control board.
- Test or replace the main control board or EEPROM module as needed.
Parts needed: Main control board (CCU), EEPROM or memory module
- If the F14 error persists after a power reset and basic checks.
- If there are visible signs of board damage (burn marks, corrosion).
- If the washer will not advance past initial stages of the cycle despite troubleshooting.
Next step
Choose the next step for F14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F14 error mean on Maytag washing machine?
The F14 error indicates a door lock mechanism failure or a potential control board fault.
Can I fix Maytag washing machine F14 error myself?
Yes, try performing a power reset by unplugging the washer for 10 minutes before restarting.
How much does it cost to fix F14 error?
Repair costs for the F14 error typically range from $150 to $450, depending on parts and labor.
When should I call a technician for F14?
Call a technician if the error persists after a reset, or if you see damage on the control board.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!