Maytag Washing Machine Error F12
⚡ Quick Answer: The Maytag washing machine error F12 indicates a malfunction related to the door lock mechanism or issues with water fill and level sensing. This erro... ✅ DIY Fixable
What Does Error F12 Mean?
The Maytag washing machine error F12 indicates a malfunction related to the door lock mechanism or issues with water fill and level sensing. This error typically arises when the washer stops mid-cycle, displaying F12, often before or during the wash cycle when water should be filling. To address this issue, check the water supply and hoses for any blockages, and ensure the door lock is functioning properly.
Common Symptoms:
- Washer stops and displays F12 during cycle
- Possible issues with water filling or sensing consistent water level
- Error occurs before or during wash cycle when water should be entering or being measured
Possible Causes
- Water fill/water level sensor issue (low)
- Water inlet hose/valve condition causing improper water supply (low)
How to Fix Error F12
DIY Fix Check Water Supply and Hoses
- Turn off and unplug the washer.
- Ensure the water faucets supplying the washer are fully open.
- Inspect the water inlet hoses for kinks, bends, or blockages.
- Straighten hoses and clear any visible debris.
- Reconnect and run a short cycle to test.
DIY Fix Unplug and Reset the Washer
- Unplug the washer from the wall outlet.
- Wait 1–2 minutes to allow the control board to reset.
- Plug the washer back in and restart the cycle.
Technician Only Inspect / Test Water Level Sensor and Inlet Components
- Disconnect the washer from power.
- Remove access panels to reach the water level sensor and water inlet valve.
- Test the water level sensor (pressure switch) for continuity with a multimeter.
- Inspect water inlet valve operation and test solenoid functionality.
- Replace faulty sensor or valve as needed.
Parts needed: Water level sensor (pressure switch), Water inlet valve
- If the error persists after basic water supply and hose checks.
- If you are not comfortable performing diagnostic electrical tests.
- If internal components (sensor, valve) appear damaged.
Next step
Choose the next step for F12
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F12 error mean on Maytag washing machine?
F12 indicates a malfunction in the door lock mechanism or issues with water fill and sensing.
Can I fix Maytag washing machine F12 error myself?
Yes, you can check the water supply, hoses, and reset the washer.
How much does it cost to fix F12 error?
The estimated repair cost for the F12 error ranges from $50 to $180.
When should I call a technician for F12?
Call a technician if the error persists after basic checks or if internal components are damaged.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!