Maytag Washing Machine Error F0E0
⚡ Quick Answer: The Maytag Washing Machine error F0E0 signals a failure in the door lock mechanism or an internal error condition. This issue often prevents the washe... ✅ DIY Fixable
What Does Error F0E0 Mean?
The Maytag Washing Machine error F0E0 signals a failure in the door lock mechanism or an internal error condition. This issue often prevents the washer from starting and is indicated by a flashing display. To resolve the F0E0 error, a control reset is required, which involves unplugging the machine for at least five minutes before plugging it back in and powering it on.
Common Symptoms:
- Washer stops and displays F0E0 code
- Washer will not proceed with cycle until reset
Possible Causes
- System/internal error requiring control reset (high)
How to Fix Error F0E0
DIY Fix Reset Washer Control
- Unplug the washer from the power source.
- Wait at least 5 minutes.
- Plug the washer back in and power it on.
- Attempt to restart the cycle.
Technician Only Diagnose Persistent System Fault
- If the F0E0 persists after reset, run diagnostic mode if available on the model.
- Inspect control board connections and wiring harness for damage.
- Check for fault codes in service diagnostics beyond F0E0.
- Replace control board only if diagnostics confirm a board-level failure.
Parts needed: Control board (if confirmed faulty), Wiring harness/connectors
- Error persists after power reset and basic checks
- Washer fails to enter or complete diagnostic modes
Next step
Choose the next step for F0E0
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F0E0 error mean on Maytag Washing Machine?
F0E0 indicates a door lock failure or an internal error, preventing the washer from starting.
Can I fix Maytag Washing Machine F0E0 error myself?
Yes, you can reset the washer by unplugging it for 5 minutes and then plugging it back in.
How much does it cost to fix F0E0 error?
Repair costs range from $150 to $500+, depending on parts and labor.
When should I call a technician for F0E0?
Call a technician if the error persists after a reset or if the washer won't enter diagnostic modes.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!