Maytag Washing Machine Error F08
⚡ Quick Answer: The Maytag washing machine error F08 indicates a communication fault between the main control board and the motor control board. This malfunction may ... ✅ DIY Fixable
What Does Error F08 Mean?
The Maytag washing machine error F08 indicates a communication fault between the main control board and the motor control board. This malfunction may prevent the washer from starting cycles or cause it to stop mid-cycle. Users may also experience related error codes, such as E02 and E03, which signify dispenser issues and door lock problems. To resolve this issue, a thorough inspection of the control boards and wiring is often necessary.
Common Symptoms:
- Washer displays F08 on the control panel
- Machine may stop mid‑cycle or fail to start
- Accompanied by other codes such as E03 (door lock) or E02 (dispenser issue) in some cases
- Drum may not spin or motor may not respond
Possible Causes
- Communication fault between main control board and motor control board (medium)
- Loose or damaged wiring/connectors between control boards and motor (medium)
- Related dispenser system fault when F08 appears with E02 (low)
How to Fix Error F08
DIY Fix Basic checks before deeper diagnostics
- Unplug the washer from power for 5 minutes, then plug it back in to attempt a reset.
- Ensure the machine is not overloaded and restart the cycle.
- If F08 appears with other codes (like E02/E03), note those codes for technician reference.
Technician Only Inspect and test control boards and wiring
- Visually inspect wiring harnesses between the main control board and the motor control board for loose connections, pin damage, or corrosion.
- Test continuity of wiring to confirm no broken circuits.
- Test the motor control board and main control board for faults; replace faulty board(s) as needed.
- If F08 is paired with dispenser errors (e.g., E02), inspect and test the dispenser actuator and diverter mechanisms.
Parts needed: Main control board, Motor control board, Wiring harness connectors, Optional: dispenser actuator/diverter (if paired code present)
- If error persists after basic reset and the machine does not start cycles normally.
- If you are not comfortable accessing internal components or the control boards.
- If the washer exhibits additional electrical or motor failures (smoke, burning smell, repeated reset attempts fail).
Next step
Choose the next step for F08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F08 error mean on Maytag washing machine?
F08 indicates a communication fault between the control boards, causing the washer to fail to start or stop mid-cycle.
Can I fix Maytag washing machine F08 error myself?
Yes, try resetting the machine by unplugging it for 5 minutes, ensuring it’s not overloaded, and noting any accompanying error codes.
How much does it cost to fix F08 error?
Repair costs for F08 can range from $150 to $600+, depending on parts and labor needed.
When should I call a technician for F08?
Call a technician if the error persists after a reset, you're uncomfortable with internal repairs, or if you notice additional failures.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!