Maytag Washing Machine Error F07
⚡ Quick Answer: The F07 error code on Maytag washing machines indicates a malfunction related to the motor control unit or the heater circuit. This error can prevent ... ✅ DIY Fixable
What Does Error F07 Mean?
The F07 error code on Maytag washing machines indicates a malfunction related to the motor control unit or the heater circuit. This error can prevent the washer from starting or completing cycles, often resulting in mid-wash aborts. In washer-dryer combos, it may also signal a heating function failure. Common causes include a stuck heater relay or issues with the motor control and tachometer readings, leading to improper machine operation.
Common Symptoms:
- Washer will not run or cycle does not start when F07 appears
- Cycle may abort mid‑wash
- Possible heating function failure (in combo units)
- Motor does not spin/respond correctly
Possible Causes
- Heater circuit fault / heater relay stuck (medium)
- Motor control unit (MCU) / tachometer reading issue (medium)
How to Fix Error F07
DIY Fix Basic checks and reset
- Turn off and unplug the washer for at least 5 minutes to allow a reset.
- Ensure the door is fully closed and latched.
- Check that the washer isn’t overloaded with laundry.
- Restart the washer to see if error recurs.
Technician Only Inspect heater and motor control circuits
- Disconnect power and remove appropriate panels to access internal components.
- For units with a heater, test the heater relay and high‑limit thermostat for continuity.
- Inspect wiring and connectors between the MCU and motor tachometer sensor for secure fit and damage.
- Test MCU functionality; replace if confirmed faulty.
Parts needed: heater relay, high‑limit thermostat, motor control board (MCU), wiring harness
- If error persists after basic reset and visual checks
- If you are not comfortable working with high voltage or internal electronics
- If the heater unit or motor control board tests indicate failure
Next step
Choose the next step for F07
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
- Typical part-only price
- $15 - $40
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F07 error mean on Maytag washing machine?
F07 indicates a motor control unit issue or heater circuit fault, preventing the washer from starting or completing cycles.
Can I fix Maytag washing machine F07 error myself?
Yes, you can try basic troubleshooting steps like resetting the washer, ensuring the door is latched, and checking for overload.
How much does it cost to fix F07 error?
Repair costs for the F07 error can range from $150 to $450, including parts and labor.
When should I call a technician for F07?
Call a technician if the error persists after basic resets, if you're uncomfortable with electrical components, or if tests indicate a failure.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!