Maytag Dryer Error PF
⚡ Quick Answer: The Maytag dryer PF error code indicates a power failure, which occurs when the dryer detects an interruption in power during a drying cycle. This can... ✅ DIY Fixable
What Does Error PF Mean?
The Maytag dryer PF error code indicates a power failure, which occurs when the dryer detects an interruption in power during a drying cycle. This can cause the display to blink, the cycle to stop, or the dryer to fail to start until the PF code is cleared. It's often a result of an actual power outage or voltage instability.
Common Symptoms:
- PF appears on display after power interruption or outage
- Dryer cycle stops or pauses unexpectedly
- Dryer won’t start or resume until PF is cleared
Possible Causes
- Actual power outage or interruption (high)
- Voltage instability or supply issue (breaker/tripped circuit) (medium)
How to Fix Error PF
DIY Fix Restart Dryer After Power Interruption
- Press and hold START to restart the interrupted drying cycle.
- If needed, press POWER to clear the PF code from the display.
- Unplug the dryer for ~5 minutes then plug back in to fully reset if the code persists.
DIY Fix Check Home Power Supply
- Check circuit breaker panel for any tripped breakers and reset if needed.
- Verify outlet is supplying correct voltage using another device or a multimeter.
- Inspect the power cord for visible damage and ensure it is fully inserted.
Technician Only Inspect Electrical Supply & Internal Connections
- Test dryer outlet voltage and circuit stability with appropriate tools.
- Inspect internal wiring harness and connections for loose or damaged wires.
- Confirm control board receives stable power signals and replace if faulty.
Parts needed: multimeter, replacement wiring harness or connectors, electronic control board (if faulty)
- PF code persists after power reset and supply checks
- Repeated PF codes without actual power outages
- Signs of electrical burning, smoke, or repeated breaker trips
Next step
Choose the next step for PF
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Control Board |
| resistance | 10-30 ohms |
| part_number | W10731345 |
| voltage_rating | 240V AC |
Common Questions
What does PF error mean on Maytag dryer?
The PF error indicates a power failure during a drying cycle, causing the dryer to stop or fail to start.
Can I fix Maytag dryer PF error myself?
Yes, you can try restarting the dryer, checking the power supply, and resetting the unit.
How much does it cost to fix PF error?
$100–$350+ depending on parts and service rates.
When should I call a technician for PF?
Call a technician if the PF code persists after resetting and checking the power supply, or if there are signs of electrical issues.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!