Maytag Dryer Error F01
⚡ Quick Answer: The Maytag dryer error F01 indicates a malfunction of the main control board, which can prevent the dryer from starting and cause erratic behavior dur... ✅ DIY Fixable
What Does Error F01 Mean?
The Maytag dryer error F01 indicates a malfunction of the main control board, which can prevent the dryer from starting and cause erratic behavior during operation. This error may require a power reset or replacement of the control board to restore proper functionality.
Common Symptoms:
- Dryer stops functioning and displays F01 when starting or during a cycle
- Unit may not respond to inputs until reset or repair
Possible Causes
- Main electronic control board malfunction (medium)
How to Fix Error F01
DIY Fix Perform a hard reset
- Turn off the dryer’s power by unplugging it or switching off the circuit breaker.
- Wait at least 5 minutes.
- Restore power and start a short timed dry cycle to see if the error clears.
Technician Only Inspect and replace the main control board
- Disconnect power to the dryer.
- Access the control board (typically behind the top control panel).
- Visually inspect the board for damage (burn marks, bulging components).
- Replace with a manufacturer‑approved control board if confirmed faulty.
- Reassemble and test the dryer.
Parts needed: Main control board
- If the F01 error persists after a hard reset
- If the dryer fails to start or behaves erratically beyond this single code
- If internal component inspection reveals damage
Next step
Choose the next step for F01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Control Board |
| resistance | N/A |
| part_number | W10818230 |
| voltage_rating | 120V AC |
Common Questions
What does F01 error mean on Maytag dryer?
F01 indicates a control board failure, causing the dryer to stop functioning or behave erratically.
Can I fix Maytag dryer F01 error myself?
Yes, you can attempt a hard reset by unplugging the dryer for 5 minutes before restoring power.
How much does it cost to fix F01 error?
Repair costs for the F01 error can range from USD 150 to 400+, depending on the model and labor.
When should I call a technician for F01?
Call a technician if the F01 error persists after a reset, if the dryer fails to start, or if components show damage.
Sources & References
- Maytag Product Help – F01 Error Code (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!