Maytag Dryer Error F05
⚡ Quick Answer: The Maytag dryer error F05 indicates a potential issue with the door switch or control board. Users may experience problems such as the dryer not star... ✅ DIY Fixable
What Does Error F05 Mean?
The Maytag dryer error F05 indicates a potential issue with the door switch or control board. Users may experience problems such as the dryer not starting or stopping unexpectedly. If the F05 error persists, it may necessitate a deeper inspection of internal components like wiring or the control board for any possible faults.
Common Symptoms:
- F05 displayed on the control panel
- Dryer may stop or fail to start normally
Possible Causes
- Door switch failure
- Control board malfunction
- Wiring issues
How to Fix Error F05
DIY Fix Verify the error code and reset the dryer
- Turn the dryer off and unplug it from power.
- Wait 1–2 minutes and plug it back in.
- Try a new dry cycle to see if the code persists.
Technician Only Check model‑specific diagnostics and internal logs
- Use the exact dryer model number to look up the service manual or tech sheet.
- Verify whether F05 is a valid code for that specific model or an alias for another fault.
- Inspect connections and control board communications for faults if the code persists.
Parts needed: Control board (if confirmed by service manual), Wiring harnesses
- If the code persists after resetting and you cannot find an official model‑specific definition in your service manual.
- If the dryer exhibits additional faults (e.g., failure to run, unusual noises, overheating).
Next step
Choose the next step for F05
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Switch / Control Board |
| resistance | N/A |
| part_number | WPW10116823 (Door Switch), WPW10111616 (Control Board) |
| voltage_rating | 120V AC |
Common Questions
What does F05 error mean on Maytag dryer?
F05 indicates a malfunction related to the door switch or control board, affecting dryer operation.
Can I fix Maytag dryer F05 error myself?
Yes, you can reset the dryer by unplugging it for 1-2 minutes and then plugging it back in. Test if the error persists.
How much does it cost to fix F05 error?
Repair costs vary by model and region; consult a technician for an accurate estimate.
When should I call a technician for F05?
Call a technician if the error persists after reset or if you notice other problems like unusual noises or overheating.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!