Maytag Dryer Error F3E5
⚡ Quick Answer: The Maytag dryer error code F3E5 indicates a malfunction in the moisture sensor, resulting in the dryer failing to heat properly or overheating. This ... ✅ DIY Fixable
What Does Error F3E5 Mean?
The Maytag dryer error code F3E5 indicates a malfunction in the moisture sensor, resulting in the dryer failing to heat properly or overheating. This error arises when the dryer detects five consecutive loads without registering moisture data, suggesting an issue with the moisture sensor or lack of contact. If the error persists, it may be necessary to inspect the moisture sensor and wiring for potential faults.
Common Symptoms:
- Error code displayed on console after cycle start or during running
- Dryer fails to proceed normally due to lack of moisture sensor input
- May clear after power cycle but reoccurs if underlying issue persists
Possible Causes
- Moisture sensor not detecting moisture data (high)
- Dryer is not level or small loads fail to contact sensors (medium)
How to Fix Error F3E5
DIY Fix Clear the error and check basic conditions
- Press the 'Power' button to clear the error code.
- Ensure the dryer is level by adjusting the feet.
- Try drying a larger load with an 'Automatic' cycle rather than small or single items to ensure moisture sensor contact.
Technician Only Inspect and service moisture sensor and wiring
- Disconnect power to the dryer.
- Access the moisture sensor inside the drum and inspect for lint buildup or residue.
- Clean the sensor strips and inspect wiring harness for damage or loose connections.
- Test moisture sensor continuity and operation according to manufacturer specs.
- Replace moisture sensor or repair wiring as needed.
Parts needed: Moisture sensor, Wiring harness
- If error persists after cleaning sensors and ensuring proper load size/levelness
- If moisture sensor or wiring tests fail or parts appear damaged
Next step
Choose the next step for F3E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dryer Moisture Sensor
Detects moisture in clothing so automatic drying cycles can stop at the selected dryness level.
- Typical part-only price
- $10 - $50
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10-30 ohms |
| part_number | WPW10150193 |
| voltage_rating | 120V AC |
Common Questions
What does F3E5 error mean on Maytag dryer?
F3E5 indicates a moisture sensor malfunction, causing the dryer to fail to heat or overheat.
Can I fix Maytag dryer F3E5 error myself?
Yes, you can clear the error, ensure the dryer is level, and try drying larger loads.
How much does it cost to fix F3E5 error?
$50 to $200, depending on whether parts like the moisture sensor need replacement.
When should I call a technician for F3E5?
Call a technician if the error persists after cleaning sensors or if parts appear damaged.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!