Maytag Dryer Error F3E4
⚡ Quick Answer: The Maytag dryer error F3E4 indicates a malfunction in the temperature sensor, leading to improper heating or inconsistent temperature readings. This ... ✅ DIY Fixable
What Does Error F3E4 Mean?
The Maytag dryer error F3E4 indicates a malfunction in the temperature sensor, leading to improper heating or inconsistent temperature readings. This error may also result from a failure in the control board motor relay, causing the dryer to fail to start or engage properly. If the error persists after a power reset, further inspection is required.
Common Symptoms:
- Error code appears on display and persists after power cycling.
- In some real‑world cases, dryer fails to start the motor or engage properly.
Possible Causes
- Control board motor relay failure (community reported) (medium)
How to Fix Error F3E4
DIY Fix Power reset and basic check
- Turn off the dryer’s circuit breaker(s) for at least 5 minutes.
- Turn the circuit breaker(s) back on.
- Start a timed dry cycle and watch for recurrence of the F3E4 code.
Technician Only Inspect and potentially replace control board motor relay
- Disconnect power and access the dryer control board.
- Visually inspect the motor relay area for burned or damaged components.
- Test the relay and associated control board outputs with appropriate tools.
- Replace the control board (e.g., part WPW10378252) if relay failure is confirmed.
Parts needed: control board (with motor relay)
- If the error persists after a power reset and basic checks.
- If the dryer fails to start the motor or exhibits electrical symptoms (clicks but no operation).
Next step
Choose the next step for F3E4
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10-30 ohms |
| part_number | WPW10150145 |
| voltage_rating | 120V AC |
Common Questions
What does F3E4 error mean on Maytag dryer?
F3E4 indicates a temperature sensor malfunction or control board motor relay failure, affecting heating and operation.
Can I fix Maytag dryer F3E4 error myself?
Yes, try a power reset by turning off the circuit breaker for 5 minutes, then check if the error recurs.
How much does it cost to fix F3E4 error?
The estimated repair cost ranges from $150 to $350, including parts and labor.
When should I call a technician for F3E4?
Call a technician if the error persists after a power reset or if the dryer fails to start or shows electrical issues.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!