Maytag Dryer Error F31

⚡ Quick Answer: The Maytag dryer error F31 indicates a malfunction related to insufficient or missing L2 (low or no line voltage) supply, which can prevent the dryer ... ✅ DIY Fixable

What Does Error F31 Mean?

The Maytag dryer error F31 indicates a malfunction related to insufficient or missing L2 (low or no line voltage) supply, which can prevent the dryer from heating or tumbling properly. Symptoms include the F31 code on the control panel, failure to heat, and intermittent cycling without heat. This issue may stem from loose power cord connections, a tripped double-pole breaker, or blown fuses in the dryer circuit.

Common Symptoms:

  • Dryer displays F31 on control panel
  • Dryer may not heat or tumble properly
  • Dryer cycles may start but no heat or error appears at start

Possible Causes

  • Insufficient or missing L2 (second hot leg) line voltage supply (high)
  • Loose or damaged power cord/terminal block connections (medium)
  • Tripped double‑pole breaker or blown fuse in dryer circuit (high)

How to Fix Error F31

DIY Fix Check power supply and breakers

  1. Ensure dryer is unplugged before inspecting
  2. Check home circuit breaker panel for dryer double‑pole breaker and reset both handles fully ON
  3. Confirm outlet voltage supply is proper 240 V (L1 to L2) if you have a safe way to measure or have an electrician assist

Technician Only Inspect dryer power connections and terminal block

  1. Disconnect power
  2. Remove rear access panel
  3. Inspect power cord, terminal block, and strain relief for burned wires or loose screws
  4. Tighten connections or replace damaged cord/terminal block with OEM parts
  5. Measure voltage at dryer terminal block (L1 to L2 ~240 V)

Parts needed: power cord, terminal block

🛑 When to Call a Pro:
  • If proper 240 V cannot be confirmed or electrical panel/breaker issues persist
  • If internal terminal block or wiring shows damage beyond basic tightening
  • If error remains after power supply is verified and connections are secure

Technical Specifications

wattage 600W
component Control Board
resistance 5-15 ohms
part_number W10810303
voltage_rating 120V AC

Common Questions

What does F31 error mean on Maytag dryer?

F31 means low or no line voltage, causing heating issues and may prevent the dryer from starting.

Can I fix Maytag dryer F31 error myself?

Yes, you can check the power supply and reset the breaker, ensuring safe handling.

How much does it cost to fix F31 error?

Repair costs range from $20 to $100 for parts, plus labor for technician services.

When should I call a technician for F31?

Call a technician if voltage issues persist, or if you notice damage to internal components.

Sources & References

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!