Maytag Dryer Error F29
⚡ Quick Answer: The Maytag dryer F29 error code indicates a malfunction in the moisture sensor circuit, which can lead to the dryer not heating or shutting off premat... ✅ DIY Fixable
What Does Error F29 Mean?
The Maytag dryer F29 error code indicates a malfunction in the moisture sensor circuit, which can lead to the dryer not heating or shutting off prematurely during moisture sensing cycles. This issue may prevent the dryer from completing a normal drying cycle. Common causes include a failed moisture sensor or wiring issues within the circuit. Addressing this error typically involves inspecting and servicing the moisture sensor assembly and associated wiring.
Common Symptoms:
- Dryer displays F29 on the panel
- Dryer may shut off quickly during moisture sensing cycles
- Inability to complete a normal drying cycle
Possible Causes
- Moisture sensor circuit fault (sensor failure or wiring issue) (medium)
How to Fix Error F29
DIY Fix Basic reset and symptom check
- Turn off power to the dryer at the circuit breaker for about 5 minutes.
- Restore power and run a time dry cycle to see if the F29 code reappears.
Technician Only Inspect and service moisture sensor circuit
- Disconnect power to the dryer.
- Access the moisture sensor bars and inspect for contamination, bridging debris, or corrosion.
- Clean the sensor bars and ensure they are dry.
- Inspect the wiring harness between the moisture sensor and the control board for damage or shorts.
- Test sensor resistance when dry; replace sensor or harness if shorted.
- If wiring and sensor are okay but code persists, test or replace the main control board sensor input circuit.
Parts needed: Moisture sensor assembly, Wiring harness, Control board (if needed)
- Cannot safely access internal parts
- Wiring harness shows damage
- Moisture sensor tests show open or shorted beyond simple cleaning
- Error persists after sensor and wiring checks
Next step
Choose the next step for F29
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dryer Moisture Sensor
Detects moisture in clothing so automatic drying cycles can stop at the selected dryness level.
- Typical part-only price
- $10 - $50
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Thermal Fuse |
| resistance | 0 ohms (continuity) |
| part_number | WP3392519 |
| voltage_rating | 240V AC |
Common Questions
What does F29 error mean on Maytag dryer?
F29 indicates a moisture sensor circuit failure, causing the dryer to not heat or shut off during cycles.
Can I fix Maytag dryer F29 error myself?
Yes, you can perform a basic reset by turning off the power for 5 minutes and testing a time dry cycle.
How much does it cost to fix F29 error?
Repair costs range from low to medium, with sensor and wiring parts being moderate, while control board replacement is higher.
When should I call a technician for F29?
Call a technician if you can't access internal parts, if wiring shows damage, or if the error persists after basic checks.
Sources & References
- Maytag F29 Error Code - Product Help (official)
- Maytag Dryer Error Code F29 - Moisture Sensor Failure (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!