Maytag Dryer Error F25
⚡ Quick Answer: The Maytag dryer error code F25 indicates a malfunction in the control board, which may prevent the dryer from starting or cause it to stop mid-cycle.... ✅ DIY Fixable
What Does Error F25 Mean?
The Maytag dryer error code F25 indicates a malfunction in the control board, which may prevent the dryer from starting or cause it to stop mid-cycle. This error can be associated with issues in the moisture sensor or related wiring, leading to communication faults within the dryer’s control systems. Regular maintenance, such as ensuring a clean lint screen and unobstructed vents, can help prevent sensor errors.
Common Symptoms:
- Dryer displays F25 on control panel and may stop operation.
- Some user reports associate F25 with sensor or circuit issues (e.g., thermistor or moisture sensor, communication issues).
Possible Causes
- Service‑required fault without specific official definition (high)
- Moisture sensor or related connection issue (community reports) (medium)
- Communication or wiring fault between control units (community reports) (medium)
How to Fix Error F25
DIY Fix Basic Reset and Check
- Disconnect the dryer from power (unplug or turn off circuit breaker) for at least 5 minutes.
- Restore power and run a timed dry cycle to see if the error returns.
- Check that the lint screen is clean and vents are unobstructed (good airflow reduces sensor errors).
Technician Only Inspect Sensors and Wiring
- Access the internal moisture sensor bars and wiring harness.
- Inspect wiring connections for looseness, damage, or pinched cables.
- Test the moisture sensor and inlet thermistor with a multimeter according to model specifications.
- If sensors or wiring harnesses are faulty, replace those components.
- If wiring and sensors check out, inspect control board communication circuits.
Parts needed: Moisture sensor assembly, Inlet thermistor (if applicable), Wiring harnesses, Control board communication circuits
- If error persists after power reset and basic checks.
- If internal wiring or sensor components show signs of damage.
- If you are not experienced with appliance electrical diagnostics.
Next step
Choose the next step for F25
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Control Board |
| resistance | N/A |
| part_number | W10812394 |
| voltage_rating | 120V AC |
Common Questions
What does F25 error mean on Maytag dryer?
F25 indicates a control board malfunction, causing the dryer to fail to start or stop mid-cycle.
Can I fix Maytag dryer F25 error myself?
Yes, you can perform a basic reset and check for lint buildup or vent obstructions.
How much does it cost to fix F25 error?
Repair costs for F25 can range from $50 to $300+, depending on parts and labor.
When should I call a technician for F25?
Call a technician if the error persists after basic checks or if you notice damaged wiring or sensors.
Sources & References
- Maytag Dryer F25 Error Code – Product Help (official)
Data last verified: 2026-02-06
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!