Maytag Dryer Error F24

⚡ Quick Answer: The Maytag dryer error code F24 indicates a communication failure within the control board, often preventing the dryer from starting or causing it to ... ✅ DIY Fixable

What Does Error F24 Mean?

The Maytag dryer error code F24 indicates a communication failure within the control board, often preventing the dryer from starting or causing it to stop unexpectedly. Users may also experience heating irregularities when this code appears. To troubleshoot, it's advised to power cycle the unit. If the issue persists, it may be related to a malfunctioning outlet thermistor or temperature sensor, necessitating further inspection and possible replacement.

Common Symptoms:

  • Code F24 displayed on dryer panel
  • Dryer may fail to start or run properly when F24 is present
  • Potential heating irregularities noted by users when F24 appears

Possible Causes

  • Unspecified internal fault detected by dryer diagnostics (official) (high)
  • Outlet thermistor (temperature sensor) malfunction (community pattern) (medium)

How to Fix Error F24

DIY Fix Power cycle the dryer

  1. Turn off the dryer at the circuit breaker or unplug it from its power source.
  2. Wait at least 5 minutes.
  3. Restore power and start a time dry cycle.
  4. Check if the F24 code reappears.

Technician Only Inspect and test thermistor/temperature sensor and related connections

  1. Disconnect the dryer from power.
  2. Access the outlet thermistor/temperature sensor (refer to model-specific service manual).
  3. Check resistance values with a multimeter versus manufacturer specification.
  4. Inspect wiring and connectors for damage or loose connections.
  5. Replace any faulty thermistor or damaged wiring.
  6. Reassemble and test the dryer.

Parts needed: Outlet thermistor/temperature sensor, Wiring harness/connectors

🛑 When to Call a Pro:
  • If the F24 error persists after power cycling and basic inspection.
  • If you are not comfortable accessing internal components due to electrical risk.

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number W10812395
voltage_rating 120V AC

Common Questions

What does F24 error mean on Maytag dryer?

The F24 error indicates a control board communication failure, affecting the dryer's operation.

Can I fix Maytag dryer F24 error myself?

Yes, you can try power cycling the dryer by turning it off and unplugging it for 5 minutes.

How much does it cost to fix F24 error?

Estimated repair costs range from $30 to $120 for parts, plus labor varies by region.

When should I call a technician for F24?

Call a technician if the F24 error persists after power cycling or if you're uncomfortable accessing internal components.

Sources & References

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!