Maytag Dryer Error F22
⚡ Quick Answer: The Maytag dryer error code F22 signals a malfunction related to the outlet thermistor or control board. This issue commonly prevents the dryer from s... ✅ DIY Fixable
What Does Error F22 Mean?
The Maytag dryer error code F22 signals a malfunction related to the outlet thermistor or control board. This issue commonly prevents the dryer from starting or causes it to stop mid-cycle, particularly during heated cycles. The root cause often stems from a faulty outlet thermistor, which could be an open circuit or a failed sensor. Additionally, restricted airflow or damaged wiring may contribute to this error.
Common Symptoms:
- Dryer displays F22 on control panel
- Dryer may stop mid‑cycle, especially on heated cycles
- Could prevent dryer from starting or heat cycle from running normally
Possible Causes
- Faulty outlet thermistor (open circuit or failed sensor) (high)
- Restricted airflow or clogged venting impacting thermistor readings (medium)
- Loose or damaged wiring to the thermistor (medium)
How to Fix Error F22
DIY Fix Basic reset and airflow check
- Unplug the dryer or turn off the circuit breaker for a few minutes to reset the control.
- Clean the lint filter thoroughly.
- Inspect and clean the exhaust vent and outside vent to ensure unrestricted airflow.
Technician Only Test and replace the outlet thermistor
- Disconnect power to the dryer.
- Locate the outlet thermistor near the blower housing or exhaust duct.
- Test the thermistor resistance with a multimeter and compare to manufacturer specs.
- Replace the thermistor if readings are out of range.
- Inspect and secure wiring connections.
Parts needed: Outlet thermistor, Wiring harness/connectors
- If the F22 error persists after cleaning airflow pathways and replacing the thermistor
- If testing reveals other sensor faults or control communication issues
- If user is not comfortable testing electrical components
Next step
Choose the next step for F22
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Switch |
| resistance | N/A |
| part_number | WP3406107 |
| voltage_rating | 120V AC |
Common Questions
What does F22 error mean on Maytag dryer?
F22 indicates a malfunction in the outlet thermistor or control board, often preventing the dryer from starting or stopping mid-cycle.
Can I fix Maytag dryer F22 error myself?
Yes, you can perform a basic reset, check airflow, and clean vents to troubleshoot the issue before considering replacement.
How much does it cost to fix F22 error?
Repair costs are generally low as the thermistor part is inexpensive, but labor costs may vary.
When should I call a technician for F22?
Call a technician if the error persists after cleaning, if other sensor faults are detected, or if you're uncomfortable testing electrical components.
Sources & References
- Maytag F22 Error Code (Product Help) (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!