Maytag Dryer Error F1E3
⚡ Quick Answer: The Maytag Dryer F1E3 error indicates a malfunction in the control board or associated wiring, often leading to erratic display behavior and the dryer... ⚠️ Difficulty Varies
What Does Error F1E3 Mean?
The Maytag Dryer F1E3 error indicates a malfunction in the control board or associated wiring, often leading to erratic display behavior and the dryer failing to start or complete cycles. If the error persists after attempting basic resets, further inspection and repair are necessary.
Common Symptoms:
- Dryer displays F1E3 code on control panel
- Dryer may fail to start or complete cycles
- Error persists after normal restart attempts
Possible Causes
- Control unit or associated wiring fault (high)
- Incorrect or incompatible electronic control board installed (medium)
How to Fix Error F1E3
DIY Fix Basic restart and reset
- Touch the POWER button, select a cycle, then hold the START/PAUSE button to attempt to start the dryer.
- If unsuccessful, unplug the dryer or switch off at the breaker for a few minutes and then restore power, then attempt to start again.
Technician Only Inspect and repair control board and wiring
- Verify correct control board part number for the exact Maytag dryer model.
- Inspect wiring harnesses and connections between the control board and other components for damage, loose connections, or corrosion.
- Replace the electronic control board with the correct and compatible part if fault is confirmed.
Parts needed: Dryer electronic control board, Wire harnesses or connectors if damaged
- If the error persists after basic reset attempts
- If the user is not experienced with electrical diagnostics or accessing internal control components
- If incorrect parts or wiring issues are suspected
Next step
Choose the next step for F1E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F1E3 error mean on Maytag Dryer?
F1E3 indicates a control board failure, causing erratic behavior or failure to start.
Can I fix Maytag Dryer F1E3 error myself?
Yes, try a basic reset by unplugging the dryer and restarting it.
How much does it cost to fix F1E3 error?
$150–$450 depending on model and region for control board repairs.
When should I call a technician for F1E3?
Call if the error persists after resets or if you're not experienced with electrical repairs.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!