Maytag Dryer Error F14
⚡ Quick Answer: The Maytag dryer F14 error code typically indicates a malfunction that may prevent the dryer from starting or completing its cycle. While the exact ca... ✅ DIY Fixable
What Does Error F14 Mean?
The Maytag dryer F14 error code typically indicates a malfunction that may prevent the dryer from starting or completing its cycle. While the exact cause is not well-documented, common issues could involve a malfunctioning control board or wiring problems. To troubleshoot, power off the dryer, unplug it for about a minute, and then restart it. Additionally, ensure that the lint screen and venting are clear for optimal airflow.
Common Symptoms:
- Error code F14 displayed on dryer control panel
- Dryer may stop or fail to complete cycle
Possible Causes
- Thermal fuse
How to Fix Error F14
DIY Fix General troubleshooting
- Power off the dryer and unplug it from the electrical outlet.
- Wait ~1 minute then plug it back in and power on to see if the code clears.
- Check and clear lint screen and venting to ensure proper airflow.
- Verify that the dryer door is fully closed and latched.
Technician Only Service diagnostics
- Access the dryer’s service/diagnostic mode (if available) to retrieve more detailed fault data.
- Inspect internal wiring harnesses, connectors, control board, and sensors for faults or damage.
- Refer to model‑specific technical documentation for F‑series error interpretation.
Parts needed: Control board (possible), Wiring harness/connectors
- If the F14 code persists after power cycling and basic checks
- If other symptoms appear (e.g., no heat, no rotation, unusual noises)
Next step
Choose the next step for F14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Thermal Fuse |
| resistance | 0 ohms (continuity) |
| part_number | 3392519 |
| voltage_rating | 240V AC |
Common Questions
What does F14 error mean on Maytag dryer?
F14 typically indicates a malfunction that may prevent the dryer from starting or completing its cycle.
Can I fix Maytag dryer F14 error myself?
Yes, try power cycling the dryer and checking the lint screen and venting for blockages.
How much does it cost to fix F14 error?
Repair costs vary, often requiring a professional service call for diagnosis and repair.
When should I call a technician for F14?
Call a technician if the F14 code persists after basic troubleshooting or if additional symptoms arise.
Sources & References
- Maytag Error Codes in Dryers – Product Help (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!