Maytag Dryer Error F10
⚡ Quick Answer: The Maytag dryer error F10 indicates a potential malfunction in the heating element, often leading to a lack of heat during operation. While the exact... ⚠️ Difficulty Varies
What Does Error F10 Mean?
The Maytag dryer error F10 indicates a potential malfunction in the heating element, often leading to a lack of heat during operation. While the exact cause is not specified, the F10 code typically signifies a functional or diagnostic fault that may require professional intervention. Users may also notice the F10 code displayed on the control panel, prompting basic troubleshooting steps.
Common Symptoms:
- Dryer displays F10 code on control panel
Possible Causes
- Heating Element
- Thermal Fuse
- Wiring Issues
How to Fix Error F10
DIY Fix Basic checks & reset
- Power cycle the dryer by unplugging it from the power source for several minutes and then plugging it back in.
- Ensure the dryer door is fully closed and latched.
- Check for obvious issues such as blocked vents, large loads, or unusual dryer behavior around the time the F10 code appeared.
Technician Only Professional diagnosis
- Connect diagnostic equipment to read service mode logs if available on the specific Maytag model.
- Inspect internal sensor circuits (e.g., thermistors, control board connections) that could cause unclassified function fault codes.
- Repair or replace faulty components based on service diagnostics.
Parts needed: Control board, Sensor assemblies, Wiring harnesses
- If the F10 error persists after a basic reset and there’s no clear user‑level cause (e.g., power interruption), contact Maytag service or a qualified technician.
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | WPW10189966 |
| voltage_rating | 240V AC |
Common Questions
What does F10 error mean on Maytag dryer?
F10 indicates a potential malfunction in the heating element, often resulting in no heat during operation.
Can I fix Maytag dryer F10 error myself?
You can try basic troubleshooting, such as power cycling the dryer and checking for blocked vents, but professional help may be needed.
How much does it cost to fix F10 error?
The repair cost typically ranges from $100 to $400+, depending on the model and parts needed.
When should I call a technician for F10?
If the F10 error persists after basic troubleshooting and there are no visible issues, it's best to contact a qualified technician.
Sources & References
- Maytag Dryer Error Codes (general listing) (official)
Data last verified: 2026-02-06
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!