Hoover Washing Machine Error E23

⚡ Quick Answer: The Hoover washing machine E23 error indicates a malfunction in the drain pump, often leading to the machine stopping mid-cycle and failing to drain w... ✅ DIY Fixable

What Does Error E23 Mean?

The Hoover washing machine E23 error indicates a malfunction in the drain pump, often leading to the machine stopping mid-cycle and failing to drain water properly. Unusual noises may accompany this issue, typically attributed to a fault in the drain pump controller or electrical circuit. Addressing this error may involve checking for blockages in the drain area and ensuring the drain hose is correctly positioned.

Common Symptoms:

  • Washer stops mid‑cycle
  • Machine may not drain properly
  • E23 displayed on the control panel

Possible Causes

  • Drain pump electrical/failure or control circuit fault (medium)

How to Fix Error E23

DIY Fix Basic checks for drain and wiring

  1. Unplug the washing machine from power.
  2. Check for visible debris or blockage in the drain area and hoses.
  3. Ensure drain hose is correctly positioned and not kinked.
  4. If comfortable, inspect accessible wiring between drain pump and machine chassis for obvious damage.

Technician Only Technician diagnostic and repair

  1. Disconnect power and access the drain pump assembly.
  2. Measure pump coil resistance with a multimeter to assess for open/short circuit.
  3. Inspect and test drain pump wiring harness for shorts or damage.
  4. If pump is faulty, replace with a Hoover‑compatible drain pump.
  5. If error persists after pump replacement, inspect main control PCB pump triac section and replace PCB if damaged.

Parts needed: Drain pump, Main control PCB

🛑 When to Call a Pro:
  • If machine shows water leakage or you observe burning smell from electrical components.
  • If internal electrical diagnostics (multimeter) indicate control board pump driver faults.
  • If you are not experienced with mains‑level electrical appliance repair.

Technical Specifications

wattage 100W
component Drain Pump
resistance 10-20 ohms
part_number Hoover 00112233
voltage_rating 240V AC

Common Questions

What does E23 error mean on Hoover washing machine?

E23 error indicates a drain pump malfunction, causing the washer to stop mid-cycle and fail to drain.

Can I fix Hoover washing machine E23 error myself?

Yes, you can perform basic checks for blockages and inspect the drain hose for kinks.

How much does it cost to fix E23 error?

Repair costs for E23 error range from $100 to $350+, depending on parts and labor.

When should I call a technician for E23?

Call a technician if you notice water leakage, burning smells, or lack of experience with electrical repairs.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!