Hoover Washing Machine Error E03
⚡ Quick Answer: The Hoover washing machine error E03 signifies a drainage fault, indicating that the machine cannot drain water properly during or after a wash cycle.... ✅ DIY Fixable
What Does Error E03 Mean?
The Hoover washing machine error E03 signifies a drainage fault, indicating that the machine cannot drain water properly during or after a wash cycle. Symptoms include water remaining in the drum at the end of the cycle, the wash program stopping unexpectedly, and the E03 code flashing on the control panel. Common causes include a clogged drain pump filter, an obstructed or kinked drain hose, or a faulty drain pump.
Common Symptoms:
- Water remains in drum at end of cycle
- Wash cycle stops mid‑program
- E03 displayed or flashes on control panel
Possible Causes
- Clogged drain pump filter (high)
- Obstructed or kinked drain hose (high)
- Faulty or blocked drain pump (medium)
How to Fix Error E03
DIY Fix Check and clear drain filter
- Unplug the washing machine
- Open the front lower access panel
- Place a shallow tray and towels to catch water
- Unscrew and remove the drain pump filter
- Remove any debris or foreign objects
- Rinse filter and reinstall securely
- Close panel and test machine
DIY Fix Inspect and clear drain hose
- Turn off and unplug machine
- Locate drain hose at rear
- Check for kinks, bends or visible blockages
- Disconnect hose from drain standpipe/sink and flush with water
- Reattach and ensure proper installation height
Technician Only Test or replace drain pump
- Disconnect machine from power
- Remove lower access panel
- Test drain pump impeller for free movement
- Measure electrical continuity of pump motor
- Replace pump if seized or electrically open
Parts needed: Drain pump assembly, Pump filter gasket (if worn)
- Water continues not to drain after checking filter, hose, and basic cleaning
- Pump motor shows electrical failure on testing
- Unusual noises or burning smell when attempting to drain
Next step
Choose the next step for E03
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 100W |
|---|---|
| component | Drain Pump |
| resistance | 20-30 ohms |
| part_number | Hoover 40000601 |
| voltage_rating | 230V AC |
Common Questions
What does E03 error mean on Hoover washing machine?
E03 indicates a drainage issue, meaning water cannot be properly drained from the machine.
Can I fix Hoover washing machine E03 error myself?
Yes, you can check and clear the drain filter and inspect the drain hose for blockages.
How much does it cost to fix E03 error?
$50–$150, depending on whether you need to replace the drain pump.
When should I call a technician for E03?
Call for service if water still doesn't drain after checking the filter and hose, or if you hear unusual noises.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!