Hoover Washing Machine Error E22
⚡ Quick Answer: The Hoover washing machine error E22 signifies a drainage failure, typically resulting in water remaining in the drum at the end of the cycle. This is... ✅ DIY Fixable
What Does Error E22 Mean?
The Hoover washing machine error E22 signifies a drainage failure, typically resulting in water remaining in the drum at the end of the cycle. This issue may also produce unusual sounds from the pump. Common causes include blockages in the drainage system, such as a clogged pump filter, hoses, or internal pathways, as well as a faulty drain pump.
Common Symptoms:
- Cycle stops or fails to complete with E22 displayed
- Water remains in drum at end of cycle
- Machine may drain slowly or not at all
Possible Causes
- Drainage blockage (pump filter, hoses, internal pathways) (medium)
- Faulty/obstructed drain pump (medium)
How to Fix Error E22
DIY Fix Check and Clear Drainage System
- Unplug the machine from power.
- Locate and open the drain pump filter access panel.
- Remove and clean any debris from the filter.
- Inspect the drain hose for kinks or visible blockages and straighten/clear as needed.
- Reassemble the filter and hose, then power on the machine to test.
Technician Only Inspect and Service Drain Pump and Related Components
- Verify electrical continuity of the drain pump.
- Check internal drain paths for blockages not accessible to users.
- Replace pump/impeller if malfunctioning.
- Inspect and test pressure switch and associated hose for proper level detection (if drainage faults persist).
Parts needed: Drain pump assembly, Pump filter, Drain hose, Pressure switch/level sensor
- If the error persists after cleaning filters and hoses
- If water continues to remain in the drum or the pump appears non‑functional
- If there are signs of electrical or sensor faults
Next step
Choose the next step for E22
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E22 error mean on Hoover washing machine?
E22 indicates a drainage failure, often resulting in water remaining in the drum and unusual pump noises.
Can I fix Hoover washing machine E22 error myself?
Yes, you can check and clear the drainage system by cleaning the pump filter and hoses.
How much does it cost to fix E22 error?
The estimated repair cost for E22 error ranges from 50 to 200 USD/EUR, depending on parts and service rates.
When should I call a technician for E22?
Call a technician if the error persists after cleaning, if water remains in the drum, or if there are signs of electrical faults.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!