Hoover Washing Machine Error E20
⚡ Quick Answer: The Hoover washing machine error E20 indicates a drainage fault, preventing water from being expelled properly. This can occur due to a blocked drain ... ✅ DIY Fixable
What Does Error E20 Mean?
The Hoover washing machine error E20 indicates a drainage fault, preventing water from being expelled properly. This can occur due to a blocked drain pump filter, a clogged or kinked drain hose, or a malfunctioning drain pump. Symptoms include water remaining in the drum after a cycle, the machine stopping mid-cycle with E20 displayed, and unusual noises from the drain area. Addressing these issues promptly is essential to restore normal operation.
Common Symptoms:
- Water remains in drum after cycle
- Machine stops mid‑cycle with E20 displayed
- No water being pumped out
- Possible unusual noises from drain area
Possible Causes
- Blockage in drain pump filter (high)
- Clogged or kinked drain hose (high)
- Faulty or obstructed drain pump (medium)
How to Fix Error E20
DIY Fix Clean drain pump filter
- Turn off and unplug the washing machine.
- Open the filter access panel at the bottom front.
- Place a shallow tray and towels to catch water.
- Unscrew and remove the drain pump filter.
- Clean out debris (lint, coins, etc.) and rinse filter.
- Reinstall the filter and secure panel.
- Run a drain/spin cycle to test.
DIY Fix Inspect and clear drain hose
- Unplug the machine.
- Check the entire length of the drain hose for kinks or bends.
- Disconnect the hose and inspect for internal blockages.
- Clear obstructions manually or with water flow.
- Reattach the hose securely ensuring proper height and alignment.
Technician Only Evaluate and service/replace drain pump
- Disconnect power and move machine to service position.
- Remove back or bottom panel to access drain pump assembly.
- Inspect and test pump impeller movement and electrical function.
- Clean any internal obstructions in pump area.
- Replace pump if faulty or impeller damaged.
Parts needed: Drain pump assembly, Pump impeller
- Water leakage from base of machine.
- Pump impeller seized or electrical faults suspected.
- Error persists after cleaning filter and hose.
Next step
Choose the next step for E20
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 120W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | Hoover 001250001 |
| voltage_rating | 230V AC |
Common Questions
What does E20 error mean on Hoover washing machine?
E20 error indicates a drainage fault where water can't be expelled due to blockages or pump issues.
Can I fix Hoover washing machine E20 error myself?
Yes, you can clean the drain pump filter and check the drain hose for kinks or blockages.
How much does it cost to fix E20 error?
Repair costs range from ¥5,000 to ¥20,000 for parts; labor costs vary by region.
When should I call a technician for E20?
Call a technician if there's water leakage, suspected electrical faults, or if the error persists after DIY fixes.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!